W90 HB HN

Screw-in socket, angle 90°



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 NPT external threads
Design Screw-in sockets
Construction Angle 90°
Sealing form 1 60° inner cone
Sealing form 2 thread seal
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm
Product Name G1 G2 AF mm
W90 HB 02 HN G 1/8" -28 1/8" -27 NPT 11
W90 HB 04 HN 02 G 1/4" -19 1/8" -27 NPT 14
W90 HB 04 HN G 1/4" -19 1/4" -18 NPT 14
W90 HB 06 HN 04 G 3/8" -19 1/4" -18 NPT 19
W90 HB 06 HN G 3/8" -19 3/8" -18 NPT 19
W90 HB 06 HN 08 G 3/8" -19 1/2" -14 NPT 22
W90 HB 08 HN 06 G 1/2" -14 3/8" -18 NPT 22
W90 HB 08 HN G 1/2" -14 1/2" -14 NPT 22
W90 HB 12 HN 08 G 3/4" -14 1/2" -14 NPT 27
W90 HB 12 HN G 3/4" -14 3/4" -14 NPT 27
W90 HB 16 HN G 1" -11 1" -11.5 NPT 33
W90 HB 20 HN G 1.1/4" -11 1.1/4" -11.5 NPT 41
W90 HB 24 HN G 1.1/2" -11 1.1/2" -11.5 NPT 50
W90 HB 32 HN G 2" -11 2" -11.5 NPT 55
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.