W90 HMO HJ

Screw-in socket, angle 90°



Properties

Connection 1 metric cylindrical outer thread
Connection 2 UN/UNF external threads
Design Adjustable direction screw-in socket
Construction Angle 90°
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 74° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm S1 OR
Product Name G1 G2 AF mm S1 OR
W90 HMO 10 HJ 04 M 10 x 1 7/16"-20 UNF 11 14 8.2 x 1.5
W90 HMO 10 HJ 05 M 10 x 1 1/2"-20 UNF 13 14 8.2 x 1.5
W90 HMO 12 HJ 04 M 12 x 1.5 7/16"-20 UNF 13 17 9.4 x 2.1
W90 HMO 12 HJ 05 M 12 x 1.5 1/2"-20 UNF 13 17 9.4 x 2.1
W90 HMO 14 HJ 04 M 14 x 1.5 7/16"-20 UNF 19 19 11.4 x 2.1
W90 HMO 14 HJ 05 M 14 x 1.5 1/2"-20 UNF 13 19 11.4 x 2.1
W90 HMO 14 HJ 06 M 14 x 1.5 9/16"-18 UNF 14 19 11.4 x 2.1
W90 HMO 16 HJ 06 M 16 x 1.5 9/16"-18 UNF 19 22 13.4 x 2.1
W90 HMO 16 HJ 08 M 16 x 1.5 3/4"-16 UNF 19 22 13.4 x 2.1
W90 HMO 18 HJ 06 M 18 x 1.5 9/16"-18 UNF 22 22 15.4 x 2.1
W90 HMO 18 HJ 08 M 18 x 1.5 3/4"-16 UNF 19 24 15.4 x 2.1
W90 HMO 18 HJ 10 M 18 x 1.5 7/8"-14 UNF 22 24 15.4 x 2.1
W90 HMO 20 HJ 08 M 20 x 1.5 3/4"-16 UNF 19 24 17.3 x 2.4
W90 HMO 20 HJ 10 M 20 x 1.5 7/8"-14 UNF 22 24 17.3 x 2.4
W90 HMO 22 HJ 08 M 22 x 1.5 3/4"-16 UNF 19 27 19.4 x 2.1
W90 HMO 22 HJ 10 M 22 x 1.5 7/8"-14 UNF 22 27 19.4 x 2.1
W90 HMO 22 HJ 12 M 22 x 1.5 1.1/16" -12 UN 27 27 19.4 x 2.1
W90 HMO 27 HJ 12 M 27 x 2 1.1/16" -12 UN 27 32 23.7 x 2.8
W90 HMO 27 HJ 16 M 27 x 2 1.5/16" -12 UN 33 32 23.7 x 2.8
W90 HMO 33 HJ 16 M 33 x 2 1.5/16" -12 UN 33 41 29.7 x 2.8
W90 HMO 42 HJ 20 M 42 x 2 1.5/8" -12 UN 41 50 38.7 x 2.8
W90 HMO 48 HJ 24 M 48 x 2 1.7/8" -12 UN 48 55 46.7 x 2.8
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.