W90 HMO HJOF

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 ORFS external threads
Construction Angle 90°
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name OR2 G2 S1 OR1 SW mm G1
Product Name OR2 G2 S1 OR1 SW mm G1
W90HMO10HJOF04 7.65 x 1.78 9/16"-18 UNF 14 8.2 x 1.5 14 mm M 10 x 1
W90HMO12HJOF04 7.65 x 1.78 9/16"-18 UNF 17 9.4 x 2.1 14 mm M 12 x 1,5
W90HMO14HJOF06 9.25 x 1.78 11/16" -16 UN 19 11.4 x 2.1 19 mm M 14 x 1.5
W90HMO16HJOF06 9.25 x 1.78 11/16" -16 UN 22 13.4 x 2.1 19 mm M 16 x 1.5
W90HMO16HJOF08 12.42 x 1.78 13/16" -16 UN 22 13.4 x 2.1 19 mm M 16 x 1.5
W90HMO18HJOF08 12.42 x 1.78 13/16" -16 UN 24 15.4 x 2.1 19 mm M 18 x 1.5
W90HMO18HJOF10 15.60 x 1.78 1" -14 UNS 24 15.4 x 2.1 27 mm M 18 x 1.5
W90HMO22HJOF08 12.42 x 1.78 13/16" -16 UN 27 19.4 x 2.1 27 mm M 22 x 1.5
W90HMO22HJOF10 15.60 x 1.78 1" -14 UNS 27 19.4 x 2.1 27 mm M 22 x 1.5
W90HMO22HJOF12 18.77 x 1.78 1.3/16" -12 UN 27 19.4 x 2.1 30 mm M 22 x 1.5
W90HMO27HJOF10 15.60 x 1.78 1" -14 UNS 32 23.7 x 2.8 27 mm M 27 x 2
W90HMO27HJOF12 18.77 x 1.78 1.3/16" -12 UN 32 23.7 x 2.8 30 mm M 27 x 2
W90HMO33HJOF12 18.77 x 1.78 1.3/16" -12 UN 41 29.7 x 2.8 30 mm M 33 x 2
W90HMO33HJOF16 23.52 x 1.78 1.7/16" -12 UN 41 29.7 x 2.8 36 mm M 33 x 2
W90HMO42HJOF16 23.52 x 1.78 1.7/16" -12 UN 50 38.7 x 2.8 36 mm M 42 x 2
W90HMO42HJOF20 29.87 x 1.78 1.11/16" -12 UN 50 38.7 x 2.8 41 mm M 42 x 2
W90HMO48HJOF20 29.87 x 1.78 1.11/16" -12 UN 55 46.7 x 2.8 41 mm M 48 x 2
W90HMO48HJOF24 37.82 x 1.78 2" -12 UN 55 46.7 x 2.8 50 mm M 48 x 2
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.