W90 HMOK HJOF

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 ORFS external threads
Construction Angle 90°
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 O-ring and spacer diaphragm ring
Sealing form 2 flat seal with O-ring
Surface electro galvanised

Article Table

Product Name OR2 G2 S1 OR1 AF mm G1
Product Name OR2 G2 S1 OR1 AF mm G1
W90 HMOK 10 HJOF 04 7.65 x 1.78 9/16"-18 UNF 15 8.00 x 1.50 14 M 10 x 1
W90 HMOK 12 HJOF 04 7.65 x 1.78 9/16"-18 UNF 18 9.30 x 2.30 14 M 12 x 1,5
W90 HMOK 14 HJOF 06 9.25 x 1.78 11/16" -16 UN 20 11.30 x 2.30 19 M 14 x 1.5
W90 HMOK 16 HJOF 06 9.25 x 1.78 11/16" -16 UN 20 13.30 x 2.30 19 M 16 x 1.5
W90 HMOK 18 HJOF 08 12.42 x 1.78 13/16" -16 UN 25 15.30 x 2.30 19 M 18 x 1.5
W90 HMOK 22 HJOF 08 12.42 x 1.78 13/16" -16 UN 28 19.30 x 2.30 19 M 22 x 1.5
W90 HMOK 22 HJOF 10 15.60 x 1.78 1" -14 UNS 28 19.30 x 2.30 27 M 22 x 1.5
W90 HMOK 27 HJOF 10 15.60 x 1.78 1" -14 UNS 32 23.47 x 2.95 27 M 27 x 2
W90 HMOK 27 HJOF 12 18.77 x 1.78 1.3/16" -12 UN 32 23.47 x 2.95 30 M 27 x 2
W90 HMOK 33 HJOF 12 18.77 x 1.78 1.3/16" -12 UN 42 29.74 x 2.95 30 M 33 x 2
W90 HMOK 33 HJOF 16 23.52 x 1.78 1.7/16" -12 UN 42 29.74 x 2.95 36 M 33 x 2
W90 HMOK 42 HJOF 16 23.52 x 1.78 1.7/16" -12 UN 50 38.00 x 3.00 36 M 42 x 2
W90 HMOK 42 HJOF 20 29.87 x 1.78 1.11/16" -12 UN 50 38.00 x 3.00 41 M 42 x 2
W90 HMOK 48 HJOF 20 29.87 x 1.78 1.11/16" -12 UN 56 44.04 x 3.53 41 M 48 x 2
W90 HMOK 48 HJOF 24 37.82 x 1.78 2" -12 UN 56 44.04 x 3.53 50 M 48 x 2
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.