W90 HN

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 NPT-external threads
Construction Angle 90°
Design Screw-in sockets
Material Steel
Sealing form 1 thread seal
Sealing form 2 thread seal
Surface electro galvanised

Article Table

Product Name G2 AF mm G1
Product Name G2 AF mm G1
W90 HN 02 1/8" -27 NPT 11 1/8" -27 NPT
W90 HN 04 1/4" -18 NPT 14 1/4" -18 NPT
W90 HN 06 HN 04 1/4" -18 NPT 19 3/8" -18 NPT
W90 HN 06 3/8" -18 NPT 19 3/8" -18 NPT
W90 HN 08 1/2" -14 NPT 22 1/2" -14 NPT
W90 HN 12 3/4" -14 NPT 27 3/4" -14 NPT
W90 HN 16 1" -11.5 NPT 41 1" -11.5 NPT
W90 HN 20 1.1/4" -11.5 NPT 48 1.1/4" -11.5 NPT
W90 HN 24 1.1/2" -11.5 NPT 48 1.1/2" -11.5 NPT
W90 HN 32 2" -11.5 NPT 50 2" -11.5 NPT
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.