W90 HN AJ VA

Screw-in socket, angle 90°



Properties

Connection 1 NPT external threads
Connection 2 UN/UNF nut threads
Design Screw-in sockets
Construction Angle 90°
Sealing form 1 thread seal
Sealing form 2 74° inner cone
Material Stainless steel

Article Table

Product Name G1 G2 AF mm S1
Product Name G1 G2 AF mm S1
W90 HN 02 AJ 04 VA 1/8" -27 NPT 7/16"-20 UNF 13 14
W90 HN 02 AJ 05 VA 1/8" -27 NPT 1/2"-20 UNF 14 16
W90 HN 04 AJ VA 1/4" -18 NPT 7/16"-20 UNF 14 14
W90 HN 04 AJ 05 VA 1/8" -27 NPT 1/2"-20 UNF 14 17
W90 HN 04 AJ 06 VA 1/4" -18 NPT 9/16"-18 UNF 16 19
W90 HN 04 AJ 08 VA 1/4" -18 NPT 3/4"-16 UNF 19 24
W90 HN 06 AJ VA 3/8" -18 NPT 9/16"-18 UNF 19 19
W90 HN 06 AJ 08 VA 3/8" -18 NPT 3/4"-16 UNF 19 22
W90 HN 06 AJ 10 VA 3/8" -18 NPT 7/8"-14 UNF 24 27
W90 HN 08 AJ VA 1/2" -14 NPT 3/4"-16 UNF 19 24
W90 HN 08 AJ 10 VA 1/2" -14 NPT 7/8"-14 UNF 24 27
W90 HN 08 AJ 12 VA 1/2" -14 NPT 1.1/16" -12 UN 24 32
W90 HN 12 AJ 10 VA 3/4" -14 NPT 7/8"-14 UNF 24 27
W90 HN 12 AJ VA 3/4" -14 NPT 1.1/16" -12 UN 27 32
W90 HN 12 AJ 16 VA 3/4" -14 NPT 1.5/16" -12 UN 33 41
W90 HN 16 AJ VA 1" -11.5 NPT 1.5/16" -12 UN 36 38
W90 HN 20 AJ VA 1.1/4" -11.5 NPT 1.5/8" -12 UN 41 50
W90 HN 24 AJ VA 1.1/2" -11.5 NPT 1.7/8" -12 UN 48 55
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.