W90 HN HJ

Screw-in socket, angle 90°



Properties

Connection 1 NPT external threads
Connection 2 UN/UNF external threads
Design Screw-in sockets
Construction Angle 90°
Sealing form 1 thread seal
Sealing form 2 74° outer cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm
Product Name G1 G2 AF mm
W90 HN 02 HJ 1/8" -27 NPT 5/16" -24 UN 8
W90 HN 02 HJ 04 1/8" -27 NPT 7/16"-20 UNF 11
W90 HN 02 HJ 05 1/8" -27 NPT 1/2"-20 UNF 13
W90 HN 02 HJ 06 1/8" -27 NPT 9/16"-18 UNF 14
W90 HN 04 HJ 1/4" -18 NPT 7/16"-20 UNF 14
W90 HN 04 HJ 05 1/4" -18 NPT 1/2"-20 UNF 14
W90 HN 04 HJ 06 1/4" -18 NPT 9/16"-18 UNF 14
W90 HN 04 HJ 08 1/4" -18 NPT 3/4"-16 UNF 19
W90 HN 06 HJ 04 3/8" -18 NPT 7/16"-20 UNF 19
W90 HN 06 HJ 3/8" -18 NPT 9/16"-18 UNF 19
W90 HN 06 HJ 05 3/8" -18 NPT 1/2"-20 UNF 19
W90 HN 06 HJ 08 3/8" -18 NPT 3/4"-16 UNF 19
W90 HN 06 HJ 10 3/8" -18 NPT 7/8"-14 UNF 22
W90 HN 08 HJ 04 1/2" -14 NPT 7/16"-20 UNF 22
W90 HN 08 HJ 1/2" -14 NPT 3/4"-16 UNF 22
W90 HN 08 HJ 05 1/2" -14 NPT 1/2"-20 UNF 19
W90 HN 08 HJ 06 1/2" -14 NPT 9/16"-18 UNF 22
W90 HN 08 HJ 10 1/2" -14 NPT 7/8"-14 UNF 22
W90 HN 08 HJ 12 1/2" -14 NPT 1.1/16" -12 UN 27
W90 HN 12 HJ 3/4" -14 NPT 1.1/16" -12 UN 27
W90 HN 12 HJ 06 3/4" -14 NPT 9/16"-18 UNF 27
W90 HN 12 HJ 08 3/4" -14 NPT 3/4"-16 UNF 27
W90 HN 12 HJ 10 3/4" -14 NPT 7/8"-14 UNF 27
W90 HN 12 HJ 14 3/4" -14 NPT 1.3/16" -12 UN 31
W90 HN 12 HJ 16 3/4" -14 NPT 1.5/16" -12 UN 33
W90 HN 16 HJ 1" -11.5 NPT 1.5/16" -12 UN 33
W90 HN 16 HJ 12 1" -11.5 NPT 1.1/16" -12 UN 33
W90 HN 16 HJ 20 1" -11.5 NPT 1.5/8" -12 UN 41
W90 HN 20 HJ 16 1.1/4" -11.5 NPT 1.5/16" -12 UN 45
W90 HN 20 HJ 1.1/4" -11.5 NPT 1.5/8" -12 UN 45
W90 HN 20 HJ 24 1.1/4" -11.5 NPT 1.7/8" -12 UN 48
W90 HN 24 HJ 20 1.1/2" -11.5 NPT 1.5/8" -12 UN 48
W90 HN 24 HJ 1.1/2" -11.5 NPT 1.7/8" -12 UN 48
W90 HN 32 HJ 2" -11.5 NPT 2.1/2" -12 UN 64
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.