W90 HN HJOF VA

Screw-in socket, angle 90°



Properties

Connection 1 NPT external threads
Connection 2 ORFS external threads
Design Screw-in sockets
Construction Angle 90°
Sealing form 1 thread seal
Sealing form 2 flat seal with O-ring
Material Stainless steel

Article Table

Product Name G1 G2 AF mm OR
Product Name G1 G2 AF mm OR
W90 HN 02 HJOF 04 VA 1/8" -27 NPT 9/16"-18 UNF 14 7.65 x 1.78
W90 HN 04 HJOF VA 1/4" -18 NPT 9/16"-18 UNF 14 7.65 x 1.78
W90 HN 04 HJOF 06 VA 1/4" -18 NPT 11/16" -16 UN 19 9.25 x 1.78
W90 HN 04 HJOF 08 VA 1/4" -18 NPT 13/16" -16 UN 22 12.42 x 1.78
W90 HN 06 HJOF VA 3/8" -18 NPT 11/16" -16 UN 19 9.25 x 1.78
W90 HN 06 HJOF 08 VA 3/8" -18 NPT 13/16" -16 UN 19 12.42 x 1.78
W90 HN 08 HJOF VA 1/2" -14 NPT 13/16" -16 UN 22 12.42 x 1.78
W90 HN 08 HJOF 10 VA 1/2" -14 NPT 1" -14 UNS 27 15.60 x 1.78
W90 HN 12 HJOF VA 3/4" -14 NPT 1.3/16" -12 UN 30 18.77 x 1.78
W90 HN 16 HJOF VA 1" -11.5 NPT 1.7/16" -12 UN 37 23.52 x 1.78
AF = Width across flats

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.