W90 HN L HJ

Screw-in socket, long, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT external threads
Connection 2 UN/UNF external threads
Construction Angle 90°
Design Screw-in socket, long
Material Steel
Online-Shop https://shop.hansa-flex.com/de/W90HNLHJ
Sealing form 1 thread seal
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name G2 SW mm G1
Product Name G2 SW mm G1
W90HNL02HJ04 7/16" -20 UN 11 mm 1/8" -27 NPT
W90HNL04HJ 7/16"-20 UNF 14 mm 1/4" -18 NPT
W90HNL04HJ06 9/16"-18 UNF 14 mm 1/4" -18 NPT
W90HNL06HJ 9/16"-18 UNF 19 mm 3/8" -18 NPT
W90HNL06HJ08 3/4" -16 UNF 19 mm 3/8" -18 NPT
W90HNL08HJ10 7/8" -14 UNF 22 mm 1/2" -14 NPT
W90HNL12HJ 1.1/16" -12 UN 27 mm 3/4" -14 NPT
W90HNL16HJ 1.5/16" -12 UN 33 mm 1" -11.5 NPT
W90HNL20HJ 1.5/8" -12 UN 41 mm 1.1/4" -11.5 NPT
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.