W90 HRK HB

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSPT conical external threads
Connection 2 BSP cylindrical external threads
Construction Angle 90°
Design Screw-in sockets
Material Steel
Sealing form 1 thread seal
Sealing form 2 60° inner cone
Surface electro galvanised

Article Table

Product Name G2 AF mm G1
Product Name G2 AF mm G1
W90 HRK 02 HB G 1/8" -28 11 R 1/8" K
W90 HRK 02 HB 04 G 1/4" -19 11 R 1/8" K
W90 HRK 04 HB 02 G 1/8" -28 14 R 1/4" K
W90 HRK 04 HB G 1/4" -19 14 R 1/4" K
W90 HRK 04 HB 06 G 3/8" -19 14 R 1/4" K
W90 HRK 06 HB 04 G 1/4" -19 14 R 3/8" K
W90 HRK 06 HB G 3/8" -19 17 R 3/8" K
W90 HRK 06 HB 08 G 1/2" -14 19 R 3/8" K
W90 HRK 08 HB 06 G 3/8" -19 19 R 1/2" K
W90 HRK 08 HB G 1/2" -14 19 R 1/2" K
W90 HRK 08 HB 12 G 3/4" -14 27 R 1/2" K
W90 HRK 12 HB 08 G 1/2" -14 27 R 3/4" K
W90 HRK 12 HB G 3/4" -14 27 R 3/4" K
W90 HRK 12 HB 16 G 1" -11 33 R 3/4" K
W90 HRK 16 HB 12 G 3/4" -14 33 R 1" K
W90 HRK 16 HB G 1" -11 36 R 1" K
W90 HRK 20 HB G 1.1/4" -11 41 R 1.1/4" K
W90 HRK 24 HB G 1.1/2" -11 48 R 1.1/2" K
W90 HRK 32 HB G 2" -11 64 R 2" K
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.