W90 HRK HJ

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSPT conical external threads
Connection 2 UN/UNF external threads
Construction Angle 90°
Design Screw-in sockets
Material Steel
Sealing form 1 thread seal
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name G2 AF mm G1
Product Name G2 AF mm G1
W90 HRK 02 HJ 04 7/16"-20 UNF 11 R 1/8" K
W90 HRK 02 HJ 05 1/2"-20 UNF 13 R 1/8" K
W90 HRK 02 HJ 06 9/16"-18 UNF 14 R 1/8" K
W90 HRK 04 HJ 7/16"-20 UNF 14 R 1/4" K
W90 HRK 04 HJ 05 1/2"-20 UNF 14 R 1/4" K
W90 HRK 04 HJ 06 9/16"-18 UNF 14 R 1/4" K
W90 HRK 04 HJ 08 3/4" -16 UNF 19 R 1/4" K
W90 HRK 06 HJ 04 7/16"-20 UNF 19 R 3/8" K
W90 HRK 06 HJ 05 1/2"-20 UNF 19 R 3/8" K
W90 HRK 06 HJ 9/16"-18 UNF 19 R 3/8" K
W90 HRK 06 HJ 08 3/4" -16 UNF 19 R 3/8" K
W90 HRK 06 HJ 10 7/8" -14 UNF 22 R 3/8" K
W90 HRK 08 HJ 04 7/16"-20 UNF 22 R 1/2" K
W90 HRK 08 HJ 06 9/16"-18 UNF 22 R 1/2" K
W90 HRK 08 HJ 3/4" -16 UNF 22 R 1/2" K
W90 HRK 08 HJ 10 7/8" -14 UNF 22 R 1/2" K
W90 HRK 08 HJ 12 1.1/16" -12 UN 27 R 1/2" K
W90 HRK 12 HJ 08 3/4" -16 UNF 27 R 3/4" K
W90 HRK 12 HJ 10 7/8" -14 UNF 27 R 3/4" K
W90 HRK 12 HJ 1.1/16" -12 UN 27 R 3/4" K
W90 HRK 12 HJ 16 1.5/16" -12 UN 33 R 3/4" K
W90 HRK 16 HJ 10 7/8" -14 UNF 33 R 1" K
W90 HRK 16 HJ 12 1.1/16" -12 UN 33 R 1" K
W90 HRK 16 HJ 1.5/16" -12 UN 33 R 1" K
W90 HRK 16 HJ 20 1.5/8" -12 UN 41 R 1" K
W90 HRK 20 HJ 16 1.5/16" -12 UN 41 R 1.1/4" K
W90 HRK 20 HJ 1.5/8" -12 UN 41 R 1.1/4" K
W90 HRK 24 HJ 1.7/8" -12 UN 48 R 1.1/2" K
W90 HRK 32 HJ 2.1/2" -12 UN 66 R 2" K
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.