W90 HRO HB

Screw-in socket, angle 90°



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 BSP cylindrical external threads
Design Adjustable direction screw-in socket
Construction Angle 90°
Sealing form 1 form G
Sealing form 2 60° inner cone
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm S1 OR
Product Name G1 G2 AF mm S1 OR
W90 HRO 02 HB G 1/8" -28 G 1/8" -28 14 16 7.65 x 1.78
W90 HRO 04 HB 02 G 1/4" -19 G 1/8" -28 14 20 10.78 x 2.62
W90 HRO 06 HB 04 G 3/8" -19 G 1/4" -19 19 24 13.94 x 2.62
W90 HRO 08 HB 06 G 1/2" -14 G 3/8" -19 22 28 17.86 x 2.62
W90 HRO 08 HB 10 G 1/2" -14 G 5/8" -14 22 28 17.86 x 2.62
W90 HRO 12 HB 08 G 3/4" -14 G 1/2" -14 27 35 23.47 x 2.62
W90 HRO 16 HB 12 G 1" -11 G 3/4" -14 27 43 29.74 x 3.53
W90 HRO 16 HB 20 G 1" -11 G 1.1/4" -11 33 43 29.74 x 3.53
W90 HRO 20 HB 16 G 1.1/4" -11 G 1" -11 41 52 37.69 x 3.53
W90 HRO 24 HB G 1.1/2" -11 G 1.1/2" -11 48 58 44.04 x 3.53
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.