W90 HRO HJ

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF external threads
Construction Angle 90°
Design Adjustable direction screw-in socket
Material Steel
Sealing form 1 form G
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name G2 S1 AF mm G1 OR
Product Name G2 S1 AF mm G1 OR
W90 HRO 02 HJ 05 1/2"-20 UNF 14 13 G 1/8" -28 8.00 x 2.00
W90 HRO 06 HJ 04 7/16" -20 UN 22 19 G 3/8" -19 13.94 x 2.62
W90 HRO 06 HJ 05 1/2"-20 UNF 22 19 G 3/8" -19 13.94 x 2.62
W90 HRO 06 HJ 08 3/4" -16 UNF 22 19 G 3/8" -19 13.94 x 2.62
W90 HRO 06 HJ 10 7/8" -14 UNF 22 22 G 3/8" -19 13.94 x 2.62
W90 HRO 08 HJ 04 7/16"-20 UNF 22 22 G 1/2" -14 17.86 x 2.62
W90 HRO 08 HJ 06 9/16"-18 UNF 27 22 G 1/2" -14 17.86 x 2.62
W90 HRO 12 HJ 1.1/16" -12 UN 36 27 G 3/4" -14 23.47 x 2.62
W90 HRO 12 HJ 14 1.3/16" -12 UN 36 33 G 3/4" -14 23.47 x 2.62
W90 HRO 12 HJ 16 1.5/16" -12 UN 36 33 G 3/4" -14 23.47 x 2.62
W90 HRO 16 HJ 12 1.1/16" -12 UN 41 33 G 1" -11 29.74 x 3.53
W90 HRO 20 HJ 16 1.5/16" -12 UN 36 33 G 1.1/4" -11 37.69 x 3.53
W90 HRO 20 HJ 24 1.7/8" -12 UN 50 48 G 1.1/4" -11 37.69 x 3.53
W90 HRO 24 HJ 1.7/8" -12 UN 55 48 G 1.1/2" -11 44.04 x 3.53
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.