W90 HROK AOB

Screw-in socket, angle 90°



Properties

Connection 1 BSP external thread, cylindrical
Connection 2 BSP nut thread
Design Screw-in sockets
Construction straight
Sealing form 1 O-ring and spacer diaphragm ring
Sealing form 2 60° outer cone with O-ring
Surface electro galvanised
Material Steel

Article Table

Product Name G1 G2 AF mm S1 S2 OR1 OR2
Product Name G1 G2 AF mm S1 S2 OR1 OR2
W90 HROK 04 AOB 02 G 1/4" -19 G 1/8" -28 14 20 14 10.77 x 2.62 4.5 x 1.5
W90 HROK 04 AOB G 1/4" -19 G 1/4" -19 14 20 17 10.77 x 2.62 6.5 x 1.0
W90 HROK 06 AOB 04 G 3/8" -19 G 1/4" -19 19 24 17 13.94 x 2.62 6.5 x 1.0
W90 HROK 06 AOB G 3/8" -19 G 3/8" -19 19 24 22 13.94 x 2.62 8.1 x 1.6
W90 HROK 08 AOB 06 G 1/2" -14 G 3/8" -19 22 28 27 17.86 x 2.62 8.1 x 1.6
W90 HROK 08 AOB G 1/2" -14 G 1/2" -14 22 28 27 17.86 x 2.62 12.1 x 1.6
W90 HROK 08 AOB 12 G 1/2" -14 G 3/4" -14 27 28 32 17.86 x 2.62 17.1 x 1.6
W90 HROK 12 AOB 08 G 3/4" -14 G 1/2" -14 30 35 27 23.47 x 2.62 12.1 x 1.6
W90 HROK 12 AOB G 3/4" -14 G 3/4" -14 30 35 32 23.47 x 2.62 17.1 x 1.6
W90 HROK 16 AOB G 1" -11 G 1" -11 36 43 32 29.75 x 3.53 22.1 x 1.6
W90 HROK 20 AOB G 1.1/4" -11 G 1.1/4" -11 50 52 50 37.69 x 3.53 29.1 x 1.6
W90 HROK 24 AOB G 1.1/2" -11 G 1.1/2" -11 50 58 60 44.04 x 3.53 35.1 x 1.6
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.