You are here:

Back to overview « Back to overview

W90 HROK HJR

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 BSP cylindrical external threads
Construction Angle 90°
Design Screw-in sockets
Material Steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 60° outer cone
Standard connection 2 JIS B 8363
Surface electro galvanised

Article Table

Product Name G1 + G2 S1 AF mm OR
Product Name G1 + G2 S1 AF mm OR
W90 HROK 04 HJR G 1/4" -19 14 19 10.77 x 2.62
W90 HROK 06 HJR G 3/8" -19 19 22 13.94 x 2.62
W90 HROK 08 HJR G 1/2" -14 22 27 17.86 x 2.62
W90 HROK 12 HJR G 3/4" -14 27 36 23.47 x 2.62
W90 HROK 16 HJR G 1" -11 33 41 29.74 x 3.53
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.

SSL
© HANSA-FLEX 2019