W90 HROK HJ VA

Screw-in socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF external threads
Construction Angle 90°
Design Adjustable direction screw-in socket
Material Stainless steel
Online-Shop https://shop.hansa-flex.com/de/W90HROKHJVA
Sealing form 1 Thread socket with O-ring + spacer diaphragm ring
Sealing form 2 74° outer cone

Article Table

Product Name G2 S1 SW mm G1 OR
Product Name G2 S1 SW mm G1 OR
W90HROK02HJ04VA 7/16"-20 UNF 14 11 mm G 1/8" -28 8.00 x 2.00
W90HROK04HJVA 7/16"-20 UNF 19 14 mm G 1/4" -19 10.78 x 2.62
W90HROK04HJ05VA 1/2"-20 UNF 19 14 mm G 1/4" -19 10.78 x 2.62
W90HROK04HJ06VA 9/16"-18 UNF 19 14 mm G 1/4" -19 10.78 x 2.62
W90HROK06HJVA 9/16"-18 UNF 22 19 mm G 3/8" -19 13.94 x 2.62
W90HROK06HJ08VA 3/4" -16 UNF 22 19 mm G 3/8" -19 13.94 x 2.62
W90HROK08HJVA 3/4" -16 UNF 27 22 mm G 1/2" -14 17.86 x 2.62
W90HROK08HJ10VA 7/8" -14 UNF 27 22 mm G 1/2" -14 17.86 x 2.62
W90HROK08HJ12VA 1.1/16" -12 UN 27 27 mm G 1/2" -14 17.86 x 2.62
W90HROK12HJVA 1.1/16" -12 UN 36 27 mm G 3/4" -14 23.47 x 2.62
W90HROK12HJ16VA 1.5/16" -12 UN 36 33 mm G 3/4" -14 23.47 x 2.62
W90HROK16HJVA 1.5/16" -12 UN 41 33 mm G 1" -11 29.74 x 3.53
W90HROK16HJ20VA 1.5/8" -12 UN 41 41 mm G 1" -11 29.74 x 3.53
W90HROK20HJVA 1.5/8" -12 UN 50 41 mm G 1.1/4" -11 37.69 x 3.53
W90HROK20HJ24VA 1.7/8" -12 UN 50 48 mm G 1.1/4" -11 37.69 x 3.53
W90HROK24HJVA 1.7/8" -12 UN 55 48 mm G 1.1/2" -11 44.04 x 3.53
SW, S1, S2 = With across flats

Order hints

Dichtungen aus NBR, FPM (Viton) auf Anfrage

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.