W90 HRO L HJ

Screw-in socket, long, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 UN/UNF external threads
Construction Angle 90°
Design Screw-in socket, long
Material Steel
Sealing form 1 form G
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name L1 mm L2 mm G2 S1 OR AF mm G1
Product Name L1 mm L2 mm G2 S1 OR AF mm G1
W90 HRO L 04 HJ 06 56.5 27.0 9/16"-18 UNF 19 8.00 x 2.00 14 G 1/4" -19
W90 HRO L 04 HJ 08 64.0 31.5 3/4" -16 UNF 19 8.00 x 2.00 19 G 1/4" -19
W90 HRO L 06 HJ 67.0 28.5 9/16"-18 UNF 22 13.94 x 2.62 19 G 3/8" -19
W90 HRO L 06 HJ 08 67.0 31.5 3/4" -16 UNF 22 13.94 x 2.62 19 G 3/8" -19
W90 HRO L 06 HJ 10 75.0 36.5 7/8" -14 UNF 22 17.86 x 2.62 22 G 3/8" -19
W90 HRO L 08 HJ 06 78.0 31.0 9/16"-18 UNF 27 17.86 x 2.62 22 G 1/2" -14
W90 HRO L 08 HJ 78.0 34.0 3/4" -16 UNF 27 17.86 x 2.62 22 G 1/2" -14
W90 HRO L 08 HJ 10 78.0 36.5 7/8" -14 UNF 27 17.86 x 2.62 22 G 1/2" -14
W90 HRO L 08 HJ 12 88.0 42.0 1.1/16" -12 UN 27 17.86 x 2.62 27 G 1/2" -14
W90 HRO L 12 HJ 10 92.0 39.5 7/8" -14 UNF 36 23.47 x 2.62 27 G 3/4" -14
W90 HRO L 12 HJ 92.0 42.0 1.1/16" -12 UN 36 23.47 x 2.62 27 G 3/4" -14
W90 HRO L 12 HJ 16 105.0 46.0 1.5/16" -12 UN 36 23.47 x 2.62 33 G 3/4" -14
W90 HRO L 16 HJ 12 105.0 44.5 1.1/16" -12 UN 41 29.74 x 3.53 33 G 1" -11
W90 HRO L 16 HJ 105.0 46.0 1.5/16" -12 UN 41 29.74 x 3.53 33 G 1" -11
W90 HRO L 16 HJ 20 124.0 52.0 1.5/8" -12 UN 41 29.74 x 3.53 41 G 1" -11
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.