W90 IN HJ VA

Screw-on socket, IGN AGJ angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 NPT internal thread
Connection 2 UN/UNF external threads
Construction Angle 90°
Design Screw-on socket
Material Stainless steel
Sealing form 1 thread seal
Sealing form 2 74° outer cone

Article Table

Product Name G2 AF mm G1
Product Name G2 AF mm G1
W90 IN 02 HJ VA 7/16"-20 UNF 14 1/8" -27 NPT
W90 IN 04 HJ VA 7/16"-20 UNF 19 1/4" -18 NPT
W90 IN 04 HJ 06 VA 9/16"-18 UNF 19 1/4" -18 NPT
W90 IN 04 HJ 08 VA 3/4" -16 UNF 19 1/4" -18 NPT
W90 IN 06 HJ VA 9/16"-18 UNF 22 3/8" -18 NPT
W90 IN 06 HJ 08 VA 3/4" -16 UNF 22 3/8" -18 NPT
W90 IN 08 HJ VA 3/4" -16 UNF 27 1/2" -14 NPT
W90 IN 12 HJ VA 1.1/16" -12 UN 33 3/4" -14 NPT
W90 IN 16 HJ VA 1.5/16" -12 UN 41 1" -11.5 NPT
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.