W90 IR HJ

Connection socket, IGR AGJ, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP cylindrical internal threads
Connection 2 UN/UNF external threads
Construction Angle 90°
Design Connection sockets
Material Steel
Online-Shop https://shop.hansa-flex.com/de/W90IRHJ
Sealing form 1 Flat seal
Sealing form 2 74° outer cone
Surface electro galvanised

Article Table

Product Name G2 SW mm G1
Product Name G2 SW mm G1
W90IR02HJ04 7/16"-20 UNF 14 mm G 1/8" -28
W90IR02HJ05 1/2"-20 UNF 14 mm G 1/8" -28
W90IR04HJ 7/16"-20 UNF 19 mm G 1/4" -19
W90IR04HJ05 1/2"-20 UNF 19 mm G 1/4" -19
W90IR04HJ06 9/16"-18 UNF 19 mm G 1/4" -19
W90IR04HJ08 3/4" -16 UNF 19 mm G 1/4" -19
W90IR06HJ 9/16"-18 UNF 22 mm G 3/8" -19
W90IR06HJ08 3/4" -16 UNF 22 mm G 3/8" -19
W90IR08HJ 3/4" -16 UNF 27 mm G 1/2" -14
W90IR08HJ10 7/8" -14 UNF 27 mm G 1/2" -14
W90IR08HJ12 1.1/16" -12 UN 27 mm G 1/2" -14
W90IR12HJ 1.1/16" -12 UN 33 mm G 3/4" -14
W90IR16HJ 1.5/16" -12 UN 41 mm G 1" -11
W90IR16HJ20 1.5/8" -12 UN 48 mm G 1" -11
W90IR20HJ 1.5/8" -12 UN 48 mm G 1.1/4" -11
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.