W90 O HJ VA

Screw-in socket, AGJ, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 UN/UNF external threads
Connection 2 UN/UNF external threads
Construction Angle 90°
Design Adjustable direction screw-in socket
Material Stainless steel
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 74° outer cone

Article Table

Product Name G2 S1 AF mm G1 OR
Product Name G2 S1 AF mm G1 OR
W90 O 04 HJ VA 7/16"-20 UNF 14 11 7/16"-20 UNF 8.92 x 1.83
W90 O 05 HJ VA 1/2"-20 UNF 16 13 1/2"-20 UNF 10.52 x 1.83
W90 O 06 HJ 04 VA 7/16"-20 UNF 17 14 9/16"-18 UNF 11.90 x 1.98
W90 O 06 HJ VA 9/16"-18 UNF 17 14 9/16"-18 UNF 11.90 x 1.98
W90 O 06 HJ 08 VA 3/4" -16 UNF 17 19 9/16"-18 UNF 11.90 x 1.98
W90 O 08 HJ VA 3/4" -16 UNF 22 19 3/4" -16 UNF 16.36 x 2.20
W90 O 08 HJ 06 VA 9/16"-18 UNF 22 19 3/4" -16 UNF 16.36 x 2.20
W90 O 10 HJ VA 7/8" -14 UNF 27 22 7/8" -14 UNF 19.18 x 2.46
W90 O 12 HJ VA 1.1/16" -12 UN 27 32 1.1/16" -12 UN 23.47 x 2.95
W90 O 16 HJ VA 1.5/16" -12 UN 38 33 1.5/16" -12 UN 29.74 x 2.95
SW, S1, S2 = With across flats

Order hints

Seals of NBR
FPM (Viton) on request

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.