WB45 AOL HL

Connection socket, angle 45°



Properties

Connection 1 metric nut thread
Connection 2 metric cylindrical outer thread
Design Connecting socket (short pipe bend)
Construction Angle 45°
Sealing form 1 24° outer cone with O-ring
Sealing form 2 24° inner cone
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series External pipe Ø mm Calculation pressure bar G1 + G2 S1 S2 OR
Product Name Series External pipe Ø mm Calculation pressure bar G1 + G2 S1 S2 OR
WB45 AOL 04 HL L 6 315 M 12 x 1.5 14 12 4.0 x 1.5
WB45 AOL 06 HL L 8 315 M 14 x 1.5 17 14 6.0 x 1.5
WB45 AOL 08 HL L 10 315 M 16 x 1.5 19 17 7.5 x 1.5
WB45 AOL 10 HL L 12 315 M 18 x 1.5 22 19 9.0 x 1.5
WB45 AOL 13 HL L 15 315 M 22 x 1.5 27 22 12.0 x 2.0
WB45 AOL 16 HL L 18 315 M 26 x 1.5 32 27 15.0 x 2.0
WB45 AOL 20 HL L 22 160 M 30 x 2 36 30 20.0 x 2.0
WB45 AOL 25 HL L 28 160 M 36 x 2 41 36 26.0 x 2.0
WB45 AOL 32 HL L 35 160 M 45 x 2 50 46 32.0 x 2.5
WB45 AOL 40 HL L 42 160 M 52 x 2 60 55 38.0 x 2.5
Series: LL = Very light L = Light S = Heavy - SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.