WB45 AOS

Connection socket, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Connection 2 metric nut thread
Construction Angle 45°
Design Connecting socket (short pipe bend)
Material Steel
Sealing form 1 24° outer cone with O-ring
Sealing form 2 24° outer cone with O-ring
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name G1 + G2 Calculation pressure bar S1 External pipe Ø mm S2 Series OR1 + OR2
Product Name G1 + G2 Calculation pressure bar S1 External pipe Ø mm S2 Series OR1 + OR2
WB45 NW 03 AOS M 14 x 1.5 600 17 6 17 S 4.0 x 1.5
WB45 NW 04 AOS M 16 x 1.5 600 19 8 19 S 6.0 x 1.5
WB45 NW 06 AOS M 18 x 1.5 600 22 10 22 S 7.5 x 1.5
WB45 NW 08 AOS M 20 x 1.5 600 24 12 24 S 9.0 x 1.5
WB45 NW 10 AOS M 22 x 1.5 600 27 14 27 S 10.0 x 2.0
WB45 NW 13 AOS M 24 x 1.5 400 30 16 30 S 12.0 x 2.0
WB45 NW 16 AOS M 30 x 2 400 36 20 36 S 16.3 x 2.4
WB45 NW 20 AOS M 36 x 2 400 46 25 46 S 20.3 x 2.4
WB45 NW 25 AOS M 42 x 2 400 50 30 50 S 25.3 x 2.4
WB45 NW 32 AOS M 52 x 2 315 60 38 60 S 33.2 x 2.4
Series: LL = Very light L = Light S = Heavy
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.