WB90 AOL HL

Connection socket, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric nut thread
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Connecting socket (short pipe bend)
Material Steel
Sealing form 1 24° outer cone with O-ring
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name G1 + G2 Calculation pressure bar External pipe Ø mm S1 Series OR S2
Product Name G1 + G2 Calculation pressure bar External pipe Ø mm S1 Series OR S2
WB90 AOL 04 HL M 12 x 1,5 315 6 14 L 4.0 x 1.5 14
WB90 AOL 06 HL M 14 x 1.5 315 8 17 L 6.0 x 1.5 14
WB90 AOL 08 HL M 16 x 1.5 315 10 19 L 7.5 x 1.5 17
WB90 AOL 10 HL M 18 x 1.5 315 12 22 L 9.0 x 1.5 19
WB90 AOL 13 HL M 22 x 1.5 315 15 27 L 12.0 x 2.0 22
WB90 AOL 16 HL M 26 x 1.5 315 18 32 L 15.0 x 2.0 27
WB90 AOL 20 HL M 30 x 2 160 22 36 L 20.0 x 2.0 36
WB90 AOL 25 HL M 36 x 2 160 28 41 L 26.0 x 2.0 36
WB90 AOL 32 HL M 45 x 2 160 35 50 L 32.0 x 2.5 46
WB90 AOL 40 HL M 52 x 2 160 42 60 L 38.0 x 2.5 55
Series: LL = Very light L = Light S = Heavy
SW, S1, S2 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.