WFG (3000 PSI)

SAE flange adapter, forged



Properties

Construction type forged
Design SAE flange adapter
Construction Angle 90°
Scope of supply flange only
Standard DIN 3901/3902
Surface electro galvanised
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name Series Ø RAD mm PB 10.9 bar Size A B1 mm B2 mm F1 mm I mm S1 mm S2 mm S3 mm L mm M metr.
Product Name Series Ø RAD mm PB 10.9 bar Size A B1 mm B2 mm F1 mm I mm S1 mm S2 mm S3 mm L mm M metr.
WFG 3001/L 15 L 15 315 1/2" M22x1,5 12 11 66,8 7,0 39 29,0 44 8,7 M 8 x 25
WFG 3002/L 18 L 18 315 3/4" M26x1,5 15 19 73,9 7,5 42 31,5 48 10,7 M 10 x 35
WFG 3002/L 22 L 22 160 3/4" M30x2 19 19 75,9 7,5 42 33,5 50 10,7 M 10 x 35
WFG 3003/L 28 L 28 160 1" M36x2 24 25 82,2 7,5 45 36,5 53 10,7 M 10 x 35
WFG 3004/L 35 L 35 160 1.1/4" M45x2 30 27 104,3 10,5 50 46,5 68 *1 *2
WFG 3005/L 42 L 42 160 1.1/2" M52x2 36 36 118,2 11,0 55 47,0 57 13,5 M 12 x 40
WFG 3001/S 16 S 16 350 1/2" M24x1,5 12 11 70,8 8,5 39 29,5 48 8,7 M 8 x 25
WFG 3002/S 20 S 20 350 3/4" M30x2 16 19 79,9 10,5 42 32,5 54 10,7 M 10 x 35
WFG 3002/S 25 S 25 350 3/4" M36x2 17 19 82,9 12,0 42 33,0 57 10,7 M 10 x 35
WFG 3003/S 25 S 25 315 1" M36x2 20 25 91,2 12,0 45 38,0 62 10,7 M 10 x 35
WFG 3003/S 30 S 30 315 1" M42x2 24 25 92,2 13,5 45 36,5 63 10,7 M 10 x 35
WFG 3004/S 25 S 25 250 1.1/4" M36x2 20 27 103,3 12,0 50 43,0 67 *1 *2
WFG 3004/S 30 S 30 250 1.1/4" M42x2 25 27 106,3 13,5 50 43,5 70 *1 *2
WFG 3004/S 38 S 38 250 1.1/4" M52x2 28 27 110,3 16,0 50 43,0 74 *1 *2
WFG 3005/S 38 S 38 200 1.1/2" M52x2 32 36 128,2 16,0 55 48,0 58 13,5 M 12 x 40
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø RAD = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.