WFG JIC (6000 PSI)

SAE flange adapter, forged



Properties

Construction type forged
Design SAE flange adapter
Construction Angle 90°
Scope of supply flange only
Standard ISO 6162, SAE J 518 C
Surface electro galvanised
Material S355J2G3 (ST52.3)

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.
Recommended screws are listed in the columns M (metr) and M (unc).

Article Table

Product Name PB 10.9 bar Size A B1 mm B2 mm E mm F1 mm S1 mm S2 mm L mm M metr. M unc
Product Name PB 10.9 bar Size A B1 mm B2 mm E mm F1 mm S1 mm S2 mm L mm M metr. M unc
WFG 6001 JIC 3/4 400 1/2" UNF 3/4" -16 9,9 13 18,2 61,6 39 38 8,7 M 8 x 30 5/16" x 1.1/4"
WFG 6001 JIC 7/8 400 1/2" UNF 7/8" -14 12,3 13 18,2 61,6 39 38 8,7 M 8 x 35 5/16" x 1.1/4"
WFG 6002 JIC 1 1/16 400 3/4" UNF 1 1/16" -12 15,5 17 23,8 78,0 48 48 10,7 M 10 x 35 3/8" x 1.1/2"
WFG 6002 JIC 1 5/16 400 3/4" UN 1.5/16" -12 21,5 17 23,8 78,0 48 48 10,7 M 10 x 35 3/8" x 1.1/2"
WFG 6002 JIC 7/8 400 3/4" UNF 7/8" -14 12,3 17 23,8 78,0 48 48 10,7 M 10 x 35 3/8" x 1.1/2"
WFG 6003 JIC 1 1/16 400 1" UNF 1 1/16" -12 15,5 24 27,8 99,0 60 60 *1 M 12 x 45 7/16" x 1.3/4"
WFG 6003 JIC 1 5/16 400 1" UN 1.5/16" -12 21,5 24 27,8 99,0 60 60 *1 M 12 x 45 7/16" x 1.3/4"
WFG 6003 JIC 1 5/8 400 1" UN 1.5/8" -12 27,5 24 27,8 99,0 60 60 *1 M 12 x 45 7/16" x 1.1/2"
WFG 6004 JIC 1 5/16 400 1.1/4" UN 1.5/16" -12 21,5 30 31,8 115,5 68 68 *2 M 14 x 50 1/2" x 1.3/4"
WFG 6004 JIC 1 5/8 400 1.1/4" UN 1.5/8" -12 27,5 30 31,8 115,5 68 68 *2 M 14 x 50 1/2" x 1.3/4"
WFG 6004 JIC 1 7/8 400 1.1/4" UN 1.7/8" -12 33,0 30 31,8 115,5 68 68 *2 M 14 x 50 1/2" x 1.3/4"
WFG 6005 JIC 1 5/8 400 1.1/2" UN 1.5/8" -12 27,5 32 36,5 133,0 76 76 17,0 M 16 x 55 5/8" x 2"
WFG 6005 JIC 1 7/8 400 1.1/2" UN 1.7/8" -12 33,0 32 36,5 133,0 76 76 17,0 M 16 x 55 5/8" x 2"
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.