WF LK

Pump connection (4 hole), angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Design Pump connection (4 hole)
Lieferumfang with metric screw set and O-ring
Material Malleable cast iron GTW 40
Mounting with metric screw set
Online-Shop https://shop.hansa-flex.com/de/WFLK
Standard DIN 3901/3902
Surface electro galvanised

Hints

Der angeführte maximale Betriebsdruck ist bezogen auf den Flansch! Der tatsächliche Betriebsdruck wird bestimmt durch das Rohr (Wandstärke) sowie die Güte des Rohres!

Article Table

Product Name Druck PB bar Ø RAD mm L mm S2 mm Schrauben 2 D mm A Schrauben 1 LK mm I mm Baureihe S1 mm OR
Product Name Druck PB bar Ø RAD mm L mm S2 mm Schrauben 2 D mm A Schrauben 1 LK mm I mm Baureihe S1 mm OR
WF35LKL10315 315 bar 10 mm 6.4 mm 30.5 mm (2x) M 6 x 35 39 mm M 16 x 1.5 (2x) M 6 x 22 35 mm 14.0 mm L 16.5 mm 20.0 x 2.5
WF35LKL12315 315 bar 12 mm 6.4 mm 30.5 mm (2x) M 6 x 35 39 mm M 18 x 1.5 (2x) M 6 x 22 35 mm 14.0 mm L 16.5 mm 20.0 x 2.5
WF35LKL15250 250 bar 15 mm 6.4 mm 30.0 mm (2x) M 6 x 35 39 mm M 22 x 1.5 (2x) M 6 x 22 35 mm 14.0 mm L 16.5 mm 20.0 x 2.5
WF35LKL18250 250 bar 18 mm 6.4 mm 30.0 mm (2x) M 6 x 40 39 mm M 26 x 1.5 (2x) M 6 x 22 35 mm 15.0 mm L 20.0 mm 20.0 x 2.5
WF40LKL15100 100 bar 15 mm 6.4 mm 30.0 mm (2x) M 6 x 45 42 mm M 22 x 1.5 (2x) M 6 x 22 40 mm 20.0 mm L 22.5 mm 26.0 x 2.5
WF40LKL18100 100 bar 18 mm 6.4 mm 30.5 mm (2x) M 6 x 45 42 mm M 26 x 1.5 (2x) M 6 x 22 40 mm 20.0 mm L 22.5 mm 26.0 x 2.5
WF40LKL22100 100 bar 22 mm 6.4 mm 30.5 mm (2x) M 6 x 45 42 mm M 30 x 2 (2x) M 6 x 22 40 mm 20.0 mm L 22.5 mm 26.0 x 2.5
WF40LKL28100 100 bar 28 mm 6.4 mm 32.5 mm (2x) M 6 x 50 42 mm M 36 x 2 (2x) M 6 x 22 40 mm 20.0 mm L 28.0 mm 26.0 x 2.5
WF40LKL35100 100 bar 35 mm 6.4 mm 30.5 mm (2x) M 6 x 60 42 mm M 45 x 2 (2x) M 6 x 22 40 mm 20.0 mm L 34.0 mm 26.0 x 2.5
WF55LKL35100 100 bar 35 mm 8.4 mm 38.5 mm (2x) M 8 x 60 58 mm M 45 x 2 (2x) M 8 x 25 55 mm 26.0 mm L 32.0 mm 32.0 x 2.5
WF55LKL42100 100 bar 42 mm 8.4 mm 38.0 mm (2x) M 8 x 70 58 mm M 52 x 2 (2x) M 8 x 25 55 mm 26.0 mm L 40.0 mm 32.0 x 2.5
WF35LKS16315 315 bar 16 mm 6.4 mm 29.5 mm (2x) M 6 x 40 39 mm M 24 x 1.5 (2x) M 6 x 22 35 mm 15.0 mm S 20.0 mm 20.0 x 2.5
WF35LKS20315 315 bar 20 mm 6.4 mm 34.5 mm (2x) M 6 x 45 39 mm M 30 x 2 (2x) M 6 x 22 35 mm 15.0 mm S 25.0 mm 20.0 x 2.5
WF40LKS20250 250 bar 20 mm 6.4 mm 29.5 mm (2x) M 6 x 45 42 mm M 30 x 2 (2x) M 6 x 22 40 mm 20.0 mm S 22.5 mm 26.0 x 2.5
WF55LKS20250 250 bar 20 mm 8.4 mm 34.5 mm (2x) M 8 x 55 58 mm M 30 x 2 (2x) M 8 x 25 55 mm 18.0 mm S 30.0 mm 32.0 x 2.5
WF55LKS25250 250 bar 25 mm 8.4 mm 37.0 mm (2x) M 8 x 55 58 mm M 36 x 2 (2x) M 8 x 25 55 mm 20.0 mm S 30.0 mm 32.0 x 2.5
WF55LKS30250 250 bar 30 mm 8.4 mm 35.5 mm (2x) M 8 x 50 58 mm M 42 x 2 (2x) M 8 x 25 55 mm 26.0 mm S 32.0 mm 32.0 x 2.5
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø RAD = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.