WF LK 3

Pump connection (3 hole), angle 90°



Properties

Design Pump connection (3 hole)
Construction Angle 90°
Mounting with metric screw set
Scope of supply with metric screw set and O-ring
Surface electro galvanised
Material Malleable cast iron GTW 40

Hints

The stated maximum working pressure relates to the flange. The actual working pressure is determined by the pipe (wall thickness) and the quality of the pipe.

Article Table

Product Name Series Ø RAD mm Pressure PB bar LK mm A D mm S1 mm S2 mm S3 mm L mm Screws OR
Product Name Series Ø RAD mm Pressure PB bar LK mm A D mm S1 mm S2 mm S3 mm L mm Screws OR
WF 30 LK L 12-3 L 12 250 30 M18x1,5 38 19 30,0 46,5 6,4 (3 x) M 6 x 25 16.0 x 2.5
WF 30 LK L 15-3 L 15 250 30 M22x1,5 38 19 30,0 46,0 6,4 (3 x) M 6 x 25 16.0 x 2.5
WF 40 LK L 22-3 L 22 160 40 M30x2 48 25 35,5 52,5 8,4 (3 x) M 8 x 30 24.0 x 2.5
WF 40 LK L 28-3 L 28 160 40 M36x2 48 25 35,5 52,5 8,4 (3 x) M 8 x 30 24.0 x 2.5
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø RAD = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.