WFS M (3000 / 6000 PSI)

SAE flange adapter, welded on, angle 90°



Properties

Design SAE flange adapter welded on connecting piece
Construction Angle 90°
Scope of supply with 2 flange halves, screw set and O-ring
Standard ISO 6162, SAE J 518 C
Surface black oiled
Material S355J2G3 (ST52.3)

Hints

In accordance with SAE J 518 C, the specified nominal pressure is defined by the flange or based on the pipe to be welded on.

Article Table

Product Name Pressure series PB 10.9 bar Size A mm B1 mm B2 mm C mm D mm E mm F1 mm F2 mm S1 mm S2 mm L mm Screws
Product Name Pressure series PB 10.9 bar Size A mm B1 mm B2 mm C mm D mm E mm F1 mm F2 mm S1 mm S2 mm L mm Screws
WFS 3003-30 M 3000 PSI 315 1" 30 21 21 52,4 69,9 26,2 79,2 58,4 45 50 10,7 (4 x) M 10 x 30
WFS 3004-25 M 3000 PSI 250 1.1/4" 25 19 27 58,7 79,4 30,2 85,3 72,6 50 59 *1 *2
WFS 3004-30 M 3000 PSI 250 1.1/4" 30 22 27 58,7 79,4 30,2 85,3 72,6 50 50 *1 *2
WFS 3004-35 M 3000 PSI 250 1.1/4" 35 31 32 58,7 79,4 30,2 85,3 72,6 50 59 *1 *2
WFS 3004-38 M 3000 PSI 250 1.1/4" 38 28 27 56,7 79,4 30,2 85,3 72,6 50 59 *1 *2
WFS 3005-38 M 3000 PSI 200 1.1/2" 38 30 32 69,9 93,8 35,7 117,1 82,2 76 76 13,5 (4 x) M 12 x 35
WFS 6004-30 M 6000 PSI 315 1.1/4" 30 22 27 66,7 95,0 31,8 106,6 77,2 68 68 *3 (4 x) M 14 x 50
WFS 6004-38 M 6000 PSI 315 1.1/4" 38 28 30 66,7 95,0 31,8 106,6 77,2 68 68 *3 (4 x) M 14 x 50
WFS 6005-38 M 6000 PSI 315 1.1/2" 38 28 32 79,4 113,0 36,5 123,5 95,0 76 76 17,0 (4 x) M 16 x 55
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.