Fitting, angle 90°, French series

  • Image_1 Image_1
  • Image_2 Image_2


Connection 1 + 2 metric cylindrical outer thread
Construction Angle 90°
Construction type French series
Design Fitting
Material Steel
Scope of supply Socket with union nut and cutting ring
Sealing form 1 + 2 24° inner cone
Surface electro galvanised


Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm L1 mm Operating pressure External pipe Ø mm S3 AF mm
Product Name L2 mm L1 mm Operating pressure External pipe Ø mm S3 AF mm
W NW 10 HF 16 38.5 PN 400 13.25 27 19
W NW 13 HF 18 41.5 PN 250 16.75 30 24
W NW 16 HF 23 47.0 PN 250 21.25 36 30
W NW 20 HF 27 52.0 PN 250 26.75 46 36
W NW 25 HF 35 60.0 PN 160 33.50 55 46
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø = External pipe diameter


Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.