W MG

Fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 + 2 metric cylindrical outer thread
Construction Angle 90°
Design Fitting
Lieferumfang Socket with union nut and cutting ring
Material Brass
Sealing form 1 + 2 24° inner cone
Standard DIN 2353, ISO 8434-1

Article Table

Product Name L1 mm L2 mm Betriebsdruck Rohr-Außen Ø mm S3 SW mm Baureihe
Product Name L1 mm L2 mm Betriebsdruck Rohr-Außen Ø mm S3 SW mm Baureihe
W04LLMG 21 mm 11.0 mm PN 63 4 mm 10 7 mm LL
W06LLMG 21 mm 9.5 mm PN 63 6 mm 12 9 mm LL
W08LLMG 23 mm 11.5 mm PN 63 8 mm 14 12 mm LL
W10LLMG 27 mm 15.5 mm PN 63 10 mm 17 14 mm LL
WNW04HLMG 27 mm 12.0 mm PN 200 6 mm 14 12 mm L
WNW06HLMG 29 mm 14.0 mm PN 200 8 mm 17 12 mm L
WNW08HLMG 30 mm 15.0 mm PN 200 10 mm 19 14 mm L
WNW10HLMG 32 mm 17.0 mm PN 200 12 mm 22 17 mm L
WNW13HLMG 36 mm 21.0 mm PN 200 15 mm 27 19 mm L
WNW16HLMG 40 mm 23.5 mm PN 200 18 mm 32 24 mm L
WNW20HLMG 44 mm 27.5 mm PN 100 22 mm 36 27 mm L
WNW25HLMG 47 mm 30.5 mm PN 100 28 mm 41 36 mm L
WNW32HLMG 56 mm 34.5 mm PN 100 35 mm 50 41 mm L
WNW40HLMG 63 mm 40.0 mm PN 100 42 mm 60 50 mm L
WNW03HSMG 31 mm 16.0 mm PN 400 6 mm 17 12 mm S
WNW04HSMG 32 mm 17.0 mm PN 400 8 mm 19 14 mm S
WNW06HSMG 34 mm 17.5 mm PN 400 10 mm 22 17 mm S
WNW08HSMG 38 mm 21.5 mm PN 400 12 mm 24 17 mm S
WNW10HSMG 40 mm 22.0 mm PN 400 14 mm 27 19 mm S
WNW13HSMG 43 mm 24.5 mm PN 250 16 mm 30 24 mm S
WNW16HSMG 48 mm 26.5 mm PN 250 20 mm 36 27 mm S
WNW20HSMG 54 mm 30.0 mm PN 250 25 mm 46 36 mm S
WNW25HSMG 62 mm 35.5 mm PN 250 30 mm 50 41 mm S
WNW32HSMG 72 mm 41.0 mm PN 200 38 mm 60 50 mm S
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.