WN MG

Screw-in fitting, angle 90°



Properties

Connection 1 NPT external threads
Connection 2 metric cylindrical outer thread
Design Screw-in fitting
Construction Angle 90°
Sealing form 1 thread seal
Sealing form 2 24° inner cone
Scope of supply Socket with union nut and cutting ring
Standard DIN 2353, ISO 8434-1
Material Brass

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure External pipe Ø mm G i mm L3 mm L4 mm L5 mm AF mm S3
Product Name Series Operating pressure External pipe Ø mm G i mm L3 mm L4 mm L5 mm AF mm S3
WN 04 LL MG LL PN 100 4 1/8" -27 NPT 7,0 21 11,0 17 9 10
WN 06 LL MG LL PN 100 6 1/8" -27 NPT 10,0 21 9,5 17 9 12
WN 08 LL MG LL PN 100 8 1/8" -27 NPT 10,0 21 9,5 17 12 14
WN NW 04 HL MG L PN 315 6 1/8" -27 NPT 10,0 27 12,0 20 12 14
WN NW 04 HL 1/4 MG L PN 315 6 1/4" -18 NPT 12,0 29 14,0 26 12 14
WN NW 06 HL MG L PN 315 8 1/4" -18 NPT 12,0 29 14,0 26 12 17
WN NW 08 HL MG L PN 315 10 1/4" -18 NPT 14,0 30 15,0 27 14 19
WN NW 10 HL MG L PN 315 12 3/8" -18 NPT 12,5 32 17,0 28 17 22
WN NW 03 HS MG S PN 630 6 1/4" -18 NPT 12,0 31 16,0 26 12 17
PN = Nominal pressure PB = Max. operating pressure - Series: LL = Very light L = Light S = Heavy - Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.