WRK MG

Screw-in fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSPT conical external threads
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Screw-in fitting
Material Brass
Scope of supply Socket with union nut and cutting ring
Sealing form 1 thread seal
Sealing form 2 24° inner cone
Standard DIN 2353
ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm S3 L4 mm G L3 mm External pipe Ø mm Operating pressure AF mm L5 mm Series
Product Name i mm S3 L4 mm G L3 mm External pipe Ø mm Operating pressure AF mm L5 mm Series
WR 04 LL MG 8 Screw-in fitting, angle 90°; Brass 10 11.0 R 1/8" K 21 4 PN 63 11 18 LL
WR 05 LL MG 8 Screw-in fitting, angle 90°; Brass 12 10.0 R 1/8" K 22 5 PN 63 11 17 LL
WR 06 LL MG 8 Screw-in fitting, angle 90°; Brass 12 10.0 R 1/8" K 22 6 PN 63 11 17 LL
WR 08 LL MG 8 Screw-in fitting, angle 90°; Brass 14 11.5 R 1/8" K 23 8 PN 63 12 20 LL
WR 10 LL MG 12 Screw-in fitting, angle 90°; Brass 17 15.5 R 1/4" K 27 10 PN 63 14 26 LL
WR 12 LL MG 12 Screw-in fitting, angle 90°; Brass 19 15.0 R 1/4" K 27 12 PN 63 17 27 LL
WR NW 04 HL MG 8 Screw-in fitting, angle 90°; Brass 14 12.0 R 1/8" K 27 6 PN 200 12 20 L
WR NW 04 HL 1/4 MG 12 Screw-in fitting, angle 90°; Brass 14 14.0 R 1/4" K 29 6 PN 200 12 26 L
WR NW 06 HL MG 12 Screw-in fitting, angle 90°; Brass 17 14.0 R 1/4" K 29 8 PN 200 12 26 L
WR NW 08 HL MG 12 Screw-in fitting, angle 90°; Brass 19 15.0 R 1/4" K 30 10 PN 200 14 27 L
WR NW 10 HL MG 12 Screw-in fitting, angle 90°; Brass 22 17.0 R 3/8" K 32 12 PN 200 17 28 L
WR NW 10 HL 1/4 MG 12 Screw-in fitting, angle 90°; Brass 22 17.0 R 1/4" K 32 12 PN 200 17 28 L
WR NW 10 HL 1/2 MG 14 Screw-in fitting, angle 90°; Brass 22 23.0 R 1/2" K 38 12 PN 200 19 34 L
WR NW 13 HL MG 14 Screw-in fitting, angle 90°; Brass 27 21.0 R 1/2" K 36 15 PN 200 19 34 L
WR NW 16 HL MG 14 Screw-in fitting, angle 90°; Brass 32 23.5 R 1/2" K 40 18 PN 200 24 36 L
WR NW 03 HS MG 12 Screw-in fitting, angle 90°; Brass 17 16.0 R 1/4" K 31 6 PN 250 12 26 S
WR NW 04 HS MG 12 Screw-in fitting, angle 90°; Brass 19 17.0 R 1/4" K 32 8 PN 250 17 27 S
WR NW 06 HS MG 12 Screw-in fitting, angle 90°; Brass 22 17.5 R 3/8" K 34 10 PN 250 17 28 S
WR NW 13 HS MG 14 Screw-in fitting, angle 90°; Brass 30 24.5 R 1/2" K 43 16 PN 250 24 32 S
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
Ø = External pipe diameter
SW, S1, S2, S3 = With across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.