WRM-PI

Wiper WRM-PI



Properties

Application Hydraulics
Design Inches
Design Wipers
Media Mineral oils
Material PUR
Installation bend the wiper into a kidney shape and press into the locating groove

Description

Easy assembly.
Simple solution.
High abrasion resistance.

Hints

Tolerance: d= h11; D= +0.2/0; L= +0.1/0; C +0.2/0

Article Table

Product Name d mm D mm L mm C mm
Product Name d mm D mm L mm C mm
WRM-PI 050 075 12,70 19,06 3,2 16,76
WRM-PI 075 112 28,57 28,57 4,8 24,88
WRM-PI 087 125 22,22 31,75 4,8 28,45
WRM-PI 100 137 25,40 34,92 4,8 31,62
WRM-PI 112 150 28,57 38,10 4,8 34,80
WRM-PI 125 162 31,75 41,27 4,8 37,97
WRM-PI 137 175 34,92 44,45 4,8 41,14
WRM-PI 150 187 38,10 47,62 4,8 44,32
WRM-PI 162 200 41,27 50,80 4,8 47,50
WRM-PI 175 212 44,45 53,97 4,8 50,67
WRM-PI 200 250 50,80 63,50 6,4 59,18
WRM-PI 225 275 57,15 69,85 6,4 65,46
WRM-PI 250 300 63,50 76,20 6,4 71,81
WRM-PI 262 312 66,67 79,37 6,4 74,98
WRM-PI 300 350 76,20 88,90 6,4 84,51
WRM-PI 350 400 88,90 101,60 6,4 97,20
WRM-PI 450 500 114,30 127,00 6,4 122,61

Order hints

We are able to produce wipers with diameters of 20 to 510 mm with short lead times.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.