WRS

Wiper WRS



Properties

Application Hydraulics
Design Wipers
Media Mineral oils, Water emulsions
Material NBR 90° Shore A
Installation bend the wiper into a kidney shape and press into the locating groove

Description

Simple solution.
Easy assembly.

Hints

Tolerance: d= h11; D= +0.2/0; L= +0.1/0; C +0.2/0

Article Table

Product Name d mm D mm L mm C mm
Product Name d mm D mm L mm C mm
WRS 751 25 19,05 31,75 5,3 25,45
WRS 100 150 25,40 38,10 5,3 31,80
WRS 129 179 33,00 45,70 5,3 39,40
WRS 157 207 40,00 52,70 5,3 46,40
WRS 187 237 47,62 60,32 5,3 54,02
WRS 196 246 50,00 62,70 5,3 56,40
WRS 200 250 50,80 63,50 5,3 57,20
WRS 220 270 56,00 68,70 5,3 62,40
WRS 225 275 57,15 69,85 5,3 63,55
WRS 236 286 60,00 72,70 5,3 66,40
WRS 248 298 63,00 75,70 5,3 69,40
WRS 275 325 70,00 82,70 5,3 76,40
WRS 300 350 76,20 88,90 5,3 82,40
WRS 315 365 80,00 92,70 5,3 86,40
WRS 325 375 82,55 95,25 5,3 88,95
WRS 346 396 88,00 100,70 5,3 94,40
WRS 374 424 95,00 107,70 5,3 101,40
WRS 600 650 152,40 165,10 5,3 158,40

Order hints

For special operating conditions (fluid, temperature, pressure ...) please contact us.
Alternative material possible: FPM.

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.