WTFP B

Wiper WTFP-B

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Anwendung Hydraulics
Design Wipers
Installation first bend the O-ring and then the PTFE ring into a kidney shape, and press into the locating groove (from 30 mm).
Material (1) Dynamic seal: PTBR, (2) Static seal: NBR
Media Mineral oil
Sliding speed max. 15.0 m/s
Temp. max. 110 °C
Temp. min. -30 °C

Description

Low dynamic friction.
No stick-slip.
Low spatial requirement.
Long service life.
Extremely good wiper effect from inside against the residual oil film on the surface of the rod.
Extreme temperatures -45°C to 200°C with Viton O-ring.

Article Table

Product Name H mm D mm d mm C mm
Product Name H mm D mm d mm C mm
WTFP0200B554470 4.2 mm 27.6 mm 20 mm 21.5 mm
WTFP0220B554470 4.2 mm 29.6 mm 22 mm 23.5 mm
WTFP0250B554470 4.2 mm 32.6 mm 25 mm 26.5 mm
WTFP0280B554470 4.2 mm 35.6 mm 28 mm 29.5 mm
WTFP0300B554470 4.2 mm 37.6 mm 30 mm 31.5 mm
WTFP0320B554470 4.2 mm 39.6 mm 32 mm 33.5 mm
WTFP0350B554470 4.2 mm 42.6 mm 35 mm 36.5 mm
WTFP0360B554470 4.2 mm 43.6 mm 36 mm 37.5 mm
WTFP0400B554470 6.3 mm 48.8 mm 40 mm 41.5 mm
WTFP0420B554470 6.3 mm 50.8 mm 42 mm 43.5 mm
WTFP0450B554470 6.3 mm 53.8 mm 45 mm 46.5 mm
WTFP0500B554470 6.3 mm 58.8 mm 50 mm 51.5 mm
WTFP0550B554470 6.3 mm 63.8 mm 55 mm 56.5 mm
WTFP0560B554470 6.3 mm 64.8 mm 56 mm 57.5 mm
WTFP0600B554470 6.3 mm 68.8 mm 60 mm 61.5 mm
WTFP0630B554470 6.3 mm 71.8 mm 63 mm 64.5 mm
WTFP0650B554470 6.3 mm 73.8 mm 65 mm 66.5 mm
WTFP0700B554470 8.1 mm 82.2 mm 70 mm 72.0 mm
WTFP0750B554470 8.1 mm 87.2 mm 75 mm 77.0 mm
WTFP0800B554470 8.1 mm 92.2 mm 80 mm 82.0 mm
WTFP0850B554470 8.1 mm 97.2 mm 85 mm 87.0 mm
WTFP0900B554470 8.1 mm 102.2 mm 90 mm 92.0 mm
WTFP0950B554470 8.1 mm 107.2 mm 95 mm 97.0 mm
WTFP1000B554470 8.1 mm 112.2 mm 100 mm 102.0 mm
WTFP1100B554470 8.1 mm 122.2 mm 110 mm 112.0 mm
WTFP1200B554470 8.1 mm 132.2 mm 120 mm 122.0 mm
WTFP1250B554470 8.1 mm 137.2 mm 125 mm 127.0 mm
WTFP1300B554470 8.1 mm 142.2 mm 130 mm 132.0 mm
WTFP1350B554470 8.1 mm 147.2 mm 135 mm 137.0 mm
WTFP1400B554470 9.5 mm 156.0 mm 140 mm 142.5 mm
WTFP1500B554470 9.5 mm 166.0 mm 150 mm 152.5 mm
WTFP1600B554470 9.5 mm 176.0 mm 160 mm 162.5 mm
WTFP1700B554470 9.5 mm 186.0 mm 170 mm 172.5 mm
WTFP1800B554470 9.5 mm 196.0 mm 180 mm 182.5 mm
WTFP1900B554470 9.5 mm 206.0 mm 190 mm 192.5 mm
WTFP2000B554470 9.5 mm 216.0 mm 200 mm 202.5 mm
WTFP2100B554470 9.5 mm 226.0 mm 210 mm 221.25 mm
WTFP2200B554470 9.5 mm 236.0 mm 220 mm 222.5 mm
WTFP2300B554470 9.5 mm 246.0 mm 230 mm 232.5 mm
WTFP2400B554470 9.5 mm 256.0 mm 240 mm 242.5 mm
WTFP2500B554470 9.5 mm 266.0 mm 250 mm 252.5 mm
WTFP2600B554470 9.5 mm 276.0 mm 260 mm 262.5 mm
WTFP2700B554470 9.5 mm 286.0 mm 270 mm 272.5 mm
WTFP2800B554470 9.5 mm 296.0 mm 280 mm 282.5 mm
WTFP3000B554470 9.5 mm 316.0 mm 300 mm 302.5 mm

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.