WVA AL

Pump connection (4 hole), aluminium, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Construction Angle 90°
Design Pump connection (4 hole)
Lieferumfang with metric screw set and O-ring
Material Aluminium
Mounting with metric screw set
Online-Shop https://shop.hansa-flex.com/de/WVAAL

Hints

Der angeführte maximale Betriebsdruck ist bezogen auf den Flansch! Der tatsächliche Betriebsdruck wird bestimmt durch das Rohr (Wandstärke) sowie die Güte des Rohres!

Article Table

Product Name Druck PB bar A Schrauben 1 LK mm S1 mm B mm L mm S2 mm Schrauben 2 OR
Product Name Druck PB bar A Schrauben 1 LK mm S1 mm B mm L mm S2 mm Schrauben 2 OR
WVA10055 120 bar G 1" -11 (2x) M 8 x 45 55 mm 29 mm 25.0 mm 8.5 mm 54.0 mm (2x) M 8 x 60 29.74 x 3.53
WVA1230 180 bar G 1/2" -14 (2x) M 6 x 30 30 mm 18 mm 11.5 mm 6.5 mm 40.0 mm (2x) M 6 x 45 15.88 x 2.62
WVA1235 180 bar G 1/2" -14 (2x) M 6 x 30 35 mm 18 mm 14.0 mm 6.5 mm 42.5 mm (2x) M 6 x 45 18.72 x 2.62
WVA1240 180 bar G 1/2" -14 (2x) M 6 x 35 40 mm 24 mm 17.0 mm 6.5 mm 47.5 mm (2x) M 6 x 55 22.22 x 2.62
WVA3440 180 bar G 3/4" -14 (2x) M 6 x 35 40 mm 24 mm 17.0 mm 6.5 mm 47.5 mm (2x) M 6 x 55 22.22 x 2.62
WVA3455 180 bar G 3/4" -14 (2x) M 8 x 45 55 mm 29 mm 25.0 mm 8.5 mm 54.0 mm (2x) M 8 x 60 29.74 x 3.53
WVA3830 180 bar G 3/8" -19 (2x) M 6 x 30 30 mm 18 mm 11.5 mm 6.5 mm 40.0 mm (2x) M 6 x 45 15.88 x 2.62
WVA3835 180 bar G 3/8" -19 (2x) M 6 x 30 35 mm 18 mm 14.0 mm 6.5 mm 42.5 mm (2x) M 6 x 45 18.72 x 2.62
PN = Nominal pressure PB = Max. operating pressure

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.