XDTR

Banjo fitting, throttle free, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 metric cylindrical outer thread
Construction T shaped
Design Banjo coupling, throttle free
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Edge sealing ring
Sealing form 2 + 3 24° inner cone
Standard ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm L7 mm Operating pressure L4 mm S2 i mm L1 mm G External pipe Ø mm S1 AF mm Series Ø d2 mm Ø D mm
Product Name L2 mm L7 mm Operating pressure L4 mm S2 i mm L1 mm G External pipe Ø mm S1 AF mm Series Ø d2 mm Ø D mm
XDTR NW 04 HL 12 19 PN 160 12.0 6 8 24 G 1/8" -28 6 6 19 L 6 14.0
XDTR NW 06 HL 15 21 PN 160 14.0 8 12 30 G 1/4" -19 8 8 22 L 8 18.0
XDTR NW 08 HL 15 22 PN 100 15.0 8 12 30 G 1/4" -19 10 8 22 L 10 18.0
XDTR NW 10 HL 18 24 PN 100 17.5 10 12 36 G 3/8" -19 12 10 27 L 12 22.0
XDTR NW 13 HL 20 27 PN 100 20.0 12 14 40 G 1/2" -14 15 12 30 L 15 26.0
XDTR NW 16 HL 20 27 PN 100 19.5 12 14 40 G 1/2" -14 18 12 30 L 18 26.0
XDTR NW 20 HL 25 34 PN 100 27.0 17 16 52 G 3/4" -14 22 17 41 L 22 32.0
XDTR NW 25 HL 29 37 PN 100 29.5 22 18 58 G 1" -11 28 22 46 L 28 39.0
XDTR NW 32 HL 34 44 PN 63 33.0 27 20 69 G 1.1/4" -11 35 27 55 L 35 49.0
XDTR NW 40 HL 41 51 PN 63 40.0 32 22 84 G 1.1/2" -11 42 32 70 L 42 55.0
XDTR NW 03 HS 15 23 PN 160 16.0 8 12 30 G 1/4" -19 6 8 22 S 6 18.0
XDTR NW 04 HS 15 23 PN 160 16.0 8 12 30 G 1/4" -19 8 8 22 S 8 18.0
XDTR NW 06 HS 18 25 PN 100 18.0 10 12 36 G 3/8" -19 10 10 27 S 10 22.0
XDTR NW 08 HS 18 25 PN 100 24.0 10 12 36 G 3/8" -19 12 10 27 S 12 22.0
XDTR NW 10 HS 21 30 PN 100 22.0 12 14 42 G 1/2" -14 14 12 32 S 14 26.0
XDTR NW 13 HS 21 30 PN 100 21.5 12 14 42 G 1/2" -14 16 12 32 S 16 26.0
XDTR NW 16 HS 28 39 PN 100 28.5 17 16 57 G 3/4" -14 20 17 46 S 20 32.0
XDTR NW 20 HS 31 43 PN 100 31.0 22 18 62 G 1" -11 25 22 50 S 25 39.0
XDTR NW 25 HS 36 50 PN 63 36.5 27 20 74 G 1.1/4" -11 30 27 60 S 30 49.0
XDTR NW 32 HS 41 57 PN 63 41.0 32 22 84 G 1.1/2" -11 38 32 70 S 38 55.0
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.