XDTR VA

Banjo fitting, throttle free, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 metric cylindrical outer thread
Construction T shaped
Design Banjo coupling, throttle free
Material Stainless steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Edge sealing ring
Sealing form 2 + 3 24° inner cone
Standard ISO 8434-1

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm L7 mm S2 i mm L1 mm S1 L4 mm G External pipe Ø mm Operating pressure AF mm Series Ø D mm Ø d2 mm
Product Name L2 mm L7 mm S2 i mm L1 mm S1 L4 mm G External pipe Ø mm Operating pressure AF mm Series Ø D mm Ø d2 mm
XDTR NW 04 HL VA 12 19 6 8 24 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 6 12.0 G 1/8" -28 6 PN 160 18 L 14.0 6
XDTR NW 06 HL VA 15 21 8 12 30 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 8 14.0 G 1/4" -19 8 PN 160 22 L 18.0 8
XDTR NW 08 HL VA 15 22 8 12 30 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 8 15.0 G 1/4" -19 10 PN 100 22 L 18.0 10
XDTR NW 10 HL VA 18 24 10 12 36 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 10 17.5 G 3/8" -19 12 PN 100 27 L 22.0 12
XDTR NW 13 HL VA 20 27 12 14 40 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 12 20.0 G 1/2" -14 15 PN 100 30 L 26.0 15
XDTR NW 16 HL VA 20 27 12 14 40 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 12 19.5 G 1/2" -14 18 PN 100 30 L 26.0 18
XDTR NW 20 HL VA 25 34 17 16 52 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 17 27.0 G 3/4" -14 22 PN 100 41 L 32.0 22
XDTR NW 25 HL VA 29 37 22 18 58 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 22 29.5 G 1" -11 28 PN 100 46 L 39.0 28
XDTR NW 32 HL VA 34 44 27 20 69 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 27 33.0 G 1.1/4" -11 35 PN 63 55 L 49.0 35
XDTR NW 40 HL VA 41 51 32 22 84 Banjo fitting, throttle free, T shaped; Socket (without union nut and cutting ring); Stainless steel 32 40.0 G 1.1/2" -11 42 PN 63 65 L 55.0 42
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.