XELOR

Screw-in fitting, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 metric cylindrical outer thread
Construction L shaped
Design Adjustable direction screw-in fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 form G
Sealing form 2 + 3 24° inner cone
Standard ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L7 mm Operating pressure L5 mm i mm L4 mm External pipe Ø mm S1 AF mm G1 Series G2 + G3 Ø d2 mm OR
Product Name L7 mm Operating pressure L5 mm i mm L4 mm External pipe Ø mm S1 AF mm G1 Series G2 + G3 Ø d2 mm OR
XELOR NW 06 HL 23 PN 315 22.5 9.5 16 8 19 14 G 1/4" -19 L M 14 x 1.5 8 10.77 x 2.62
XELOR NW 08 HL 24 PN 315 24.5 9.5 17 10 19 19 G 1/4" -19 L M 16 x 1.5 10 10.77 x 2.62
XELOR NW 10 HL 26 PN 250 27.5 9.5 19 12 22 19 G 3/8" -19 L M 18 x 1.5 12 13.94 x 2.62
XELOR NW 13 HL 28 PN 250 30.0 13.0 21 15 27 22 G 1/2" -14 L M 22 x 1.5 15 17.86 x 2.62
XELOR NW 16 HL 31 PN 250 36.5 13.0 24 18 27 27 G 1/2" -14 L M 26 x 1.5 18 17.86 x 2.62
XELOR NW 20 HL 35 PN 160 37.5 13.0 28 22 36 30 G 3/4" -14 L M 30 x 2 22 23.47 x 2.62
XELOR NW 25 HL 38 PN 160 41.0 16.0 31 28 41 36 G 1" -11 L M 36 x 2 28 29.74 x 3.53
XELOR NW 32 HL 48 PN 160 49.0 16.0 38 35 50 50 G 1.1/4" -11 L M 45 x 2 35 37.69 x 3.53
XELOR NW 40 HL 49 PN 160 51.0 16.0 38 42 55 50 G 1.1/2" -11 L M 52 x 2 42 44.04 x 3.53
XELOR NW 32 HS 50 PN 160 53.0 16.0 34 38 55 50 G 1.1/2" -11 S M 52 x 2 38 44.04 x 3.53
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.