XETO

Screw-in fitting, T shaped



Properties

Connection 1 UN/UNF external threads
Connection 2 + 3 metric cylindrical outer thread
Design Adjustable direction screw-in fitting
Construction T shaped
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 + 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 G2 + G3 i mm L3 mm L4 mm L5 mm AF mm S1 OR
Product Name Series Operating pressure Ø d2 mm G1 G2 + G3 i mm L3 mm L4 mm L5 mm AF mm S1 OR
XETO NW 04 HL 7/16 L PN 315 6 7/16"-20 UNF M 12 x 1.5 10 29 14 19 14 14 8.92 x 1.83
XETO NW 06 HL 7/16 L PN 315 8 7/16"-20 UNF M 14 x 1.5 10 31 16 19 14 14 8.92 x 1.83
XETO NW 06 HL 1/2 L PN 315 8 1/2"-20 UNF M 14 x 1.5 10 31 16 19 14 17 10.52 x 1.83
XETO NW 06 HL 9/16 L PN 315 8 9/16"-18 UNF M 14 x 1.5 10 31 16 24 17 19 11.90 x 1.98
XETO NW 08 HL 9/16 L PN 315 10 9/16"-18 UNF M 16 x 1.5 10 32 17 24 17 19 11.90 x 1.98
XETO NW 10 HL 3/4 L PN 315 12 3/4"-16 UNF M 18 x 1.5 13 34 19 25 22 19 16.36 x 2.20
XETO NW 10 HL 9/16 L PN 315 12 9/16"-18 UNF M 18 x 1.5 11 34 19 25 17 19 11.90 x 1.98
XETO NW 13 HL 3/4 L PN 315 15 3/4"-16 UNF M 22 x 1.5 13 36 21 28 22 22 16.36 x 2.20
XETO NW 13 HL 7/8 L PN 315 15 7/8"-14 UNF M 22 x 1.5 15 36 21 28 27 22 19.18 x 2.46
XETO NW 16 HL 1 1/16 L PN 315 18 1.1/16" -12 UN M 26 x 1.5 17 40 24 32 32 30 23.47 x 2.95
XETO NW 16 HL 7/8 L PN 315 18 7/8"-14 UNF M 26 x 1.5 15 40 24 32 27 27 19.18 x 2.46
XETO NW 20 HL 1 1/16 L PN 160 22 1.1/16" -12 UN M 30 x 2 17 44 28 35 32 30 23.47 x 2.95
XETO NW 25 HL 1 5/16 L PN 160 28 1.5/16" -12 UN M 36 x 2 17 47 31 42 41 36 29.74 x 2.95
XETO NW 32 HL 1 5/8 L PN 160 35 1.5/8" -12 UN M 45 x 2 17 59 38 46 50 50 37.47 x 3.00
XETO NW 40 HL 1 7/8 L PN 160 42 1.7/8" -12 UN M 52 x 2 17 61 38 47 55 50 43.69 x 3.00
XETO NW 03 HS 7/16 S PN 400 6 7/16"-20 UNF M 14 x 1.5 12 30 15 20 14 14 8.92 x 1.83
XETO NW 04 HS 1/2 S PN 400 8 1/2"-20 UNF M 16 x 1.5 12 32 19 25 19 17 10.52 x 1.83
XETO NW 04 HS 9/16 S PN 400 8 9/16"-18 UNF M 16 x 1.5 12 32 17 25 19 17 11.90 x 1.98
XETO NW 06 HS 9/16 S PN 400 10 9/16"-18 UNF M 18 x 1.5 12 34 18 26 17 19 11.90 x 1.98
XETO NW 08 HS 3/4 S PN 400 12 3/4"-16 UNF M 20 x 1.5 14 38 22 30 22 22 16.36 x 2.20
XETO NW 10 HS 7/8 S PN 250 14 7/8"-14 UNF M 22 x 1.5 13 34 16 31 27 27 19.18 x 2.95
XETO NW 13 HS 7/8 S PN 400 16 7/8"-14 UNF M 24 x 1.5 16 43 25 34 27 27 19.18 x 2.46
XETO NW 16 HS 1 1/16 S PN 400 20 1.1/16" -12 UN M 30 x 2 19 49 28 37 32 30 23.47 x 2.95
XETO NW 20 HS 1 1/16 S PN 400 25 1.1/16" -12 UN M 36 x 2 19 54 30 50 32 36 23.47 x 2.95
XETO NW 20 HS 1 5/16 S PN 250 25 1.5/16" -12 UN M 36 x 2 19 54 30 50 36 41 29.74 x 2.95
XETO NW 25 HS 1 5/8 S PN 250 30 1.5/8" -12 UN M 42 x 2 19 62 36 50 50 50 37.47 x 3.00
XETO NW 32 HS 1 7/8 S PN 250 38 1.7/8" -12 UN M 52 x 2 19 65 34 51 55 50 43.69 x 3.00
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.