XETOR

Screw-in fitting, T shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 + 3 metric cylindrical outer thread
Construction T shaped
Design Adjustable direction screw-in fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 form G
Sealing form 2 + 3 24° inner cone
Standard ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Operating pressure L5 mm i mm L4 mm L3 mm External pipe Ø mm S1 AF mm G1 Series G2 + G3 Ø d2 mm OR
Product Name Operating pressure L5 mm i mm L4 mm L3 mm External pipe Ø mm S1 AF mm G1 Series G2 + G3 Ø d2 mm OR
XETOR NW 04 HL PN 315 19 7 14 21 6 14 14 G 1/8" -28 L M 12 x 1,5 6 8.00 x 1.50
XETOR NW 06 HL PN 315 23 9 16 23 8 19 14 G 1/4" -19 L M 14 x 1.5 8 10.77 x 2.62
XETOR NW 08 HL PN 315 25 9 17 24 10 19 19 G 1/4" -19 L M 16 x 1.5 10 10.77 x 2.62
XETOR NW 10 HL PN 250 28 9 19 26 12 22 19 G 3/8" -19 L M 18 x 1.5 12 13.94 x 2.62
XETOR NW 13 HL PN 250 30 13 21 28 15 27 22 G 1/2" -14 L M 22 x 1.5 15 17.86 x 2.62
XETOR NW 16 HL PN 250 36 13 24 31 18 27 27 G 1/2" -14 L M 26 x 1.5 18 17.86 x 2.62
XETOR NW 20 HL PN 160 36 13 28 35 22 36 30 G 3/4" -14 L M 30 x 2 22 23.47 x 2.62
XETOR NW 25 HL PN 160 44 15 31 38 28 41 36 G 1" -11 L M 36 x 2 28 29.50 x 3.53
XETOR NW 32 HL PN 160 50 15 38 48 35 50 50 G 1.1/4" -11 L M 45 x 2 35 37.69 x 3.53
XETOR NW 40 HL PN 160 52 15 38 49 42 50 50 G 1.1/2" -11 L M 52 x 2 42 44.04 x 3.53
XETOR NW 03 HS PN 315 23 9 15 22 6 19 14 G 1/4" -19 S M 14 x 1.5 6 10.77 x 2.62
XETOR NW 04 HS PN 315 27 9 17 24 8 19 19 G 1/4" -19 S M 16 x 1.5 8 10.77 x 2.62
XETOR NW 06 HS PN 250 29 9 18 25 10 22 19 G 3/8" -19 S M 18 x 1.5 10 13.94 x 2.62
XETOR NW 08 HS PN 250 29 9 22 29 12 22 22 G 3/8" -19 S M 20 x 1.5 12 13.94 x 2.62
XETOR NW 10 HS PN 250 36 13 25 43 14 27 27 G 1/2" -14 S M 22 x 1.5 14 17.86 x 2.62
XETOR NW 13 HS PN 250 36 13 25 33 16 27 27 G 1/2" -14 S M 24 x 1.5 16 17.86 x 2.62
XETOR NW 16 HS PN 250 39 12 28 38 20 36 30 G 3/4" -14 S M 30 x 2 20 23.47 x 2.62
XETOR NW 20 HS PN 250 44 14 30 42 25 41 36 G 1" -11 S M 36 x 2 25 29.74 x 3.53
XETOR NW 25 HS PN 160 49 15 36 49 30 50 50 G 1.1/4" -11 S M 42 x 2 30 37.69 x 3.53
XETOR NW 32 HS PN 160 55 15 34 50 38 55 50 G 1.1/2" -11 S M 52 x 2 38 44.04 x 3.53
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.