XEWO

Screw-in fitting, angle 90°



Properties

Connection 1 UN/UNF external threads
Connection 2 metric cylindrical outer thread
Design Adjustable direction screw-in fitting
Construction Angle 90°
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard ISO 8434-1
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 G2 i mm L4 mm L5 mm L7 mm AF mm S1 OR
Product Name Series Operating pressure Ø d2 mm G1 G2 i mm L4 mm L5 mm L7 mm AF mm S1 OR
XEWO NW04 HL 7/16 L PN 315 6 7/16" UNF M 12 x 1.5 10 14 19 21 14 14 8.92 x 1.83
XEWO NW06 HL 7/16 L PN 315 8 7/16" UNF M 14 x 1.5 10 16 19 23 14 14 8.92 x 1.83
XEWO NW06 HL 1/2 L PN 315 8 1/2" UNF M 14 x 1.5 10 16 19 24 14 17 10.52 x 1.83
XEWO NW06 HL 9/16 L PN 315 8 9/16" UNF M 14 x 1.5 10 16 24 24 19 17 11.90 x 1.98
XEWO NW08 HL 9/16 L PN 315 10 9/16" UNF M 16 x 1.5 10 17 24 24 19 17 11.90 x 1.98
XEWO NW10 HL 9/16 L PN 315 12 9/16" UNF M 18 x 1.5 11 19 25 26 19 17 11.90 x 1.98
XEWO NW10 HL 3/4 L PN 315 12 3/4" UNF M 18 x 1.5 13 19 25 26 19 22 16.36 x 2.20
XEWO NW13 HL 3/4 L PN 315 15 3/4" UNF M 22 x 1.5 13 21 28 28 22 22 16.36 x 2.20
XEWO NW13 HL 7/8 L PN 315 15 7/8" UNF M 22 x 1.5 15 21 28 28 22 27 19.18 x 2.46
XEWO NW16 HL 7/8 L PN 315 18 7/8" UNF M 26 x 1.5 15 24 32 31 27 27 19.18 x 2.46
XEWO NW16 HL 1 1/16 L PN 315 18 1.1/16" UN M 26 x 1.5 17 24 32 31 30 32 23.47 x 2.95
XEWO NW20 HL 1 1/16 L PN 160 22 1.1/16" UN M 30 x 2 17 28 35 35 30 32 23.47 x 2.95
XEWO NW25 HL 1 5/16 L PN 160 28 1.5/16" UN M 36 x 2 17 31 42 38 36 41 29.74 x 2.95
XEWO NW32 HL 1 5/8 L PN 160 35 1.5/8" UN M 45 x 2 17 38 46 48 50 50 37.47 x 3.00
XEWO NW40 HL 1 7/8 L PN 160 42 1.7/8" UN M 52 x 2 17 38 47 49 50 55 43.69 x 3.00
XEWO NW03 HS 7/16 S PN 400 6 7/16" UNF M 14 x 1.5 12 15 20 22 14 14 8.92 x 1.83
XEWO NW04 HS 1/2 S PN 400 8 1/2" UNF M 16 x 1.5 11 17 22 25 14 17 10.52 x 1.83
XEWO NW04 HS 9/16 S PN 400 8 9/16" UNF M 16 x 1.5 12 17 25 24 19 17 11.90 x 1.98
XEWO NW06 HS 9/16 S PN 400 10 9/16" UNF M 18 x 1.5 12 18 26 25 19 17 11.90 x 1.98
XEWO NW08 HS 3/4 S PN 400 12 3/4" UNF M 20 x 1.5 14 22 30 29 22 22 16.36 x 2.20
XEWO NW10 HS 7/8 S PN 400 14 7/8" UNF M 22 x 1.5 16 25 34 33 27 24 19.18 x 2.46
XEWO NW13 HS 7/8 S PN 400 16 7/8" UNF M 24 x 1.5 16 25 34 33 27 27 19.18 x 2.46
XEWO NW16 HS 1 1/16 S PN 400 20 1.1/16" UN M 30 x 2 19 28 37 38 30 32 23.47 x 2.95
XEWO NW20 HS 1 1/16 S PN 400 25 1.1/16" UN M 36 x 2 19 30 50 42 36 32 23.47 x 2.95
XEWO NW20 HS 1 5/16 S PN 400 25 1.5/16" UN M 36 x 2 19 33 50 45 41 36 29.74 x 2.95
XEWO NW25 HS 1 5/8 S PN 250 30 1.5/8" UN M 42 x 2 19 36 50 49 50 50 37.47 x 3.00
XEWO NW32 HS 1 7/8 S PN 250 38 1.7/8" UN M 52 x 2 19 34 51 50 50 55 43.69 x 3.00
PN = Nominal pressure PB = Max. operating pressure - Series: LL = Very light L = Light S = Heavy - Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.