XEWOM 45

Screw-in fitting, angle 45°



Properties

Connection 1 metric cylindrical outer thread
Connection 2 metric cylindrical outer thread
Design Adjustable direction screw-in fitting
Construction Angle 45°
Sealing form 1 O-ring seal on screw-in socket
Sealing form 2 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G1 G2 i mm L4 mm L5 mm L7 mm AF mm S1 OR
Product Name Series Operating pressure Ø d2 mm G1 G2 i mm L4 mm L5 mm L7 mm AF mm S1 OR
XEWOM 45 NW 04 HL L PN 315 6 M 10 x 1 M 12 x 1.5 8 9 20 16 14 14 8.1 x 1.6
XEWOM 45 NW 06 HL L PN 315 8 M 12 x 1.5 M 14 x 1.5 11 12 18 19 14 17 9.3 x 2.4
XEWOM 45 NW 08 HL L PN 315 10 M 14 x 1.5 M 16 x 1.5 11 12 22 19 19 19 11.3 x 2.4
XEWOM 45 NW 10 HL L PN 315 12 M 16 x 1.5 M 18 x 1.5 11 14 23 21 19 22 13.3 x 2.4
XEWOM 45 NW 13 HL L PN 315 15 M 18 x 1.5 M 22 x 1.5 12 17 23 24 22 24 15.3 x 2.4
XEWOM 45 NW 16 HL L PN 315 18 M 22 x 1.5 M 26 x 1.5 12 17 30 24 27 27 19.3 x 2.4
XEWOM 45 NW 20 HL 27 L PN 160 22 M 27 x 2 M 30 x 2 15 19 30 26 30 32 23.6 x 2.9
XEWOM 45 NW 25 HL L PN 160 28 M 33 x 2 M 36 x 2 15 23 34 31 36 41 29.5 x 3.0
XEWOM 45 NW 32 HL L PN 160 35 M 42 x 2 M 45 x 2 15 27 36 37 50 50 38.0 x 3.0
XEWOM 45 NW 40 HL L PN 160 42 M 48 x 2 M 52 x 2 17 26 36 37 50 55 44.5 x 3.0
XEWOM 45 NW 03 HS S PN 400 6 M 12 x 1.5 M 14 x 1.5 11 9 18 16 14 17 9.3 x 2.4
XEWOM 45 NW 04 HS S PN 400 8 M 14 x 1.5 M 16 x 1.5 11 12 18 19 19 19 11.3 x 2.4
XEWOM 45 NW 06 HS S PN 400 10 M 16 x 1.5 M 18 x 1.5 12 13 22 21 19 22 13.3 x 2.4
XEWOM 45 NW 08 HS S PN 400 12 M 18 x 1.5 M 20 x 1.5 14 17 23 24 22 24 15.3 x 2.4
XEWOM 45 NW 10 HS S PN 400 14 M 20 x 1.5 M 22 x 1.5 14 16 23 24 27 27 17.3 x 2.4
XEWOM 45 NW 13 HS S PN 400 16 M 22 x 1.5 M 24 x 1.5 14 16 20 24 27 27 19.3 x 2.4
XEWOM 45 NW 16 HS S PN 400 20 M 27 x 2 M 30 x 2 18 16 33 27 30 32 23.6 x 2.9
XEWOM 45 NW 20 HS S PN 315 25 M 33 x 2 M 36 x 2 18 19 35 31 36 41 29.5 x 3.0
XEWOM 45 NW 25 HS S PN 250 30 M 42 x 2 M 42 x 2 18 24 36 37 50 50 38.0 x 3.0
XEWOM 45 NW 32 HS S PN 200 38 M 42 x 2 M 52 x 2 21 21 36 37 50 55 38.0 x 3.0
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.