XEWOR

Screw-in fitting, angle 90°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Construction Angle 90°
Design Adjustable direction screw-in fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 form G
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L7 mm Operating pressure L5 mm L4 mm i mm G2 External pipe Ø mm S1 AF mm G1 Series Ø d2 mm OR
Product Name L7 mm Operating pressure L5 mm L4 mm i mm G2 External pipe Ø mm S1 AF mm G1 Series Ø d2 mm OR
XEWOR NW 04 HL 19 PN 250 21.5 12.0 8 M 12 x 1,5 6 14 12 G 1/8" -28 L 6 8.0 x 1.5
XEWOR NW 06 HL 21 PN 250 26.0 14.0 12 M 14 x 1.5 8 19 14 G 1/4" -19 L 8 10.0 x 2.0
XEWOR NW 06 HL 3/8 24 PN 250 28.5 17.0 12 M 14 x 1.5 8 22 17 G 3/8" -19 L 8 14.0 x 2.5
XEWOR NW 08 HL 22 PN 250 26.0 15.0 12 M 16 x 1.5 10 19 14 G 1/4" -19 L 10 10.0 x 2.0
XEWOR NW 10 HL 24 PN 250 28.5 17.0 12 M 18 x 1.5 12 22 17 G 3/8" -19 L 12 14.0 x 2.5
XEWOR NW 13 HL 28 PN 250 33.5 21.0 14 M 22 x 1.5 15 27 19 G 1/2" -14 L 15 18.0 x 3.0
XEWOR NW 16 HL 31 PN 160 36.5 23.5 14 M 26 x 1.5 18 27 24 G 1/2" -14 L 18 18.0 x 3.0
XEWOR NW 20 HL 35 PN 160 41.0 27.5 16 M 30 x 2 22 32 27 G 3/4" -14 L 22 23.5 x 3.0
XEWOR NW 25 HL 38 PN 100 45.0 30.5 18 M 36 x 2 28 41 36 G 1" -11 L 28 29.0 x 3.5
XEWOR NW 32 HL 45 PN 100 50.0 34.5 20 M 45 x 2 35 50 41 G 1.1/4" -11 L 35 38.0 x 3.5
XEWOR NW 40 HL 51 PN 100 56.0 40.0 22 M 52 x 2 42 55 50 G 1.1/2" -11 L 42 44.0 x 3.5
XEWOR NW 03 HS 22 PN 630 26.0 15.0 12 M 14 x 1.5 6 19 12 G 1/4" -19 S 6 10.0 x 2.0
XEWOR NW 04 HS 24 PN 630 27.0 17.0 12 M 16 x 1.5 8 19 14 G 1/4" -19 S 8 10.0 x 2.0
XEWOR NW 06 HS 25 PN 630 28.5 17.5 12 M 18 x 1.5 10 22 17 G 3/8" -19 S 10 14.0 x 2.5
XEWOR NW 08 HS 29 PN 630 32.5 21.5 12 M 20 x 1.5 12 22 19 G 3/8" -19 S 12 14.0 x 2.5
XEWOR NW 10 HS 30 PN 630 33.5 22.0 14 M 22 x 1.5 14 27 19 G 1/2" -14 S 14 18.0 x 3.0
XEWOR NW 13 HS 33 PN 400 36.5 24.5 14 M 24 x 1.5 16 27 24 G 1/2" -14 S 16 18.0 x 3.0
XEWOR NW 16 HS 39 PN 400 41.0 26.5 16 M 30 x 2 20 32 27 G 3/4" -14 S 20 23.5 x 3.0
XEWOR NW 20 HS 42 PN 400 45.0 30.0 18 M 36 x 2 25 41 36 G 1" -11 S 25 29.0 x 3.5
XEWOR NW 25 HS 49 PN 250 50.0 35.5 20 M 42 x 2 30 50 41 G 1.1/4" -11 S 30 38.0 x 3.5
XEWOR NW 32 HS 57 PN 250 56.0 41.0 22 M 52 x 2 38 55 50 G 1.1/2" -11 S 38 44.0 x 3.5
PN = Nominal pressure PB = Max. operating pressure
Series: LL = Very light L = Light S = Heavy
Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.