XEWOR 45

Screw-in fitting, angle 45°

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP external thread, cylindrical
Connection 2 metric cylindrical outer thread
Construction Angle 45°
Design Adjustable direction screw-in fitting
Lieferumfang Socket (without union nut and cutting ring)
Material Steel
Sealing form 1 form G
Sealing form 2 24° inner cone
Surface electro galvanised

Hints

Hinweise zur Montage, Einbau, Druckbelastung und zulässige Betriebstemperaturen entnehmen Sie bitte den technischen Informationen für Rohrverschraubungen.

Article Table

Product Name L7 mm Betriebsdruck L5 mm i mm G2 L4 mm Rohr-Außen Ø mm S1 SW mm G1 Baureihe Ø d2 mm OR
Product Name L7 mm Betriebsdruck L5 mm i mm G2 L4 mm Rohr-Außen Ø mm S1 SW mm G1 Baureihe Ø d2 mm OR
XEWOR45NW04HL 16.0 mm PN 315 21 mm 8 mm M 12 x 1,5 9 mm 6 mm 14 14 mm G 1/8" -28 L 6 mm 8.00 x 1.50
XEWOR45NW06HL 19.0 mm PN 315 20 mm 9 mm M 14 x 1.5 12 mm 8 mm 19 14 mm G 1/4" -19 L 8 mm 10.77 x 2.62
XEWOR45NW08HL 19.0 mm PN 315 25 mm 9 mm M 16 x 1.5 12 mm 10 mm 19 19 mm G 1/4" -19 L 10 mm 10.77 x 2.62
XEWOR45NW10HL 21.0 mm PN 250 28 mm 9 mm M 18 x 1.5 14 mm 12 mm 22 19 mm G 3/8" -19 L 12 mm 13.94 x 2.62
XEWOR45NW13HL 24.0 mm PN 250 26 mm 13 mm M 22 x 1.5 17 mm 15 mm 27 22 mm G 1/2" -14 L 15 mm 17.86 x 2.62
XEWOR45NW16HL 24.5 mm PN 250 32 mm 13 mm M 26 x 1.5 17 mm 18 mm 27 27 mm G 1/2" -14 L 18 mm 17.86 x 2.62
XEWOR45NW20HL 26.5 mm PN 160 37 mm 13 mm M 30 x 2 19 mm 22 mm 36 30 mm G 3/4" -14 L 22 mm 23.47 x 2.62
XEWOR45NW25HL 30.5 mm PN 160 37 mm 15 mm M 36 x 2 23 mm 28 mm 41 36 mm G 1" -11 L 28 mm 29.74 x 3.53
XEWOR45NW32HL 37.5 mm PN 160 39 mm 15 mm M 45 x 2 27 mm 35 mm 50 50 mm G 1.1/4" -11 L 35 mm 37.69 x 3.53
XEWOR45NW40HL 37.0 mm PN 160 39 mm 15 mm M 52 x 2 26 mm 42 mm 55 50 mm G 1.1/2" -11 L 42 mm 44.04 x 3.53
XEWOR45NW03HS 16.0 mm PN 315 19 mm 9 mm M 14 x 1.5 9 mm 6 mm 19 14 mm G 1/4" -19 S 6 mm 10.77 x 2.62
XEWOR45NW04HS 19.0 mm PN 315 23 mm 9 mm M 16 x 1.5 12 mm 8 mm 19 19 mm G 1/4" -19 S 8 mm 10.77 x 2.62
XEWOR45NW06HS 20.5 mm PN 250 25 mm 9 mm M 16 x 1.5 13 mm 10 mm 22 19 mm G 3/8" -19 S 10 mm 13.94 x 2.62
XEWOR45NW08HS 24.5 mm PN 250 25 mm 9 mm M 20 x 1.5 17 mm 12 mm 22 22 mm G 3/8" -19 S 12 mm 13.94 x 2.62
XEWOR45NW10HS 24.5 mm PN 250 31 mm 13 mm M 22 x 1.5 16 mm 14 mm 27 27 mm G 1/2" -14 S 14 mm 17.86 x 2.62
XEWOR45NW13HS 24.5 mm PN 250 31 mm 13 mm M 24 x 1.5 16 mm 16 mm 27 27 mm G 1/2" -14 S 16 mm 17.86 x 2.62
XEWOR45NW16HS 26.5 mm PN 250 34 mm 12 mm M 30 x 2 16 mm 20 mm 36 30 mm G 3/4" -14 S 20 mm 23.47 x 2.62
XEWOR45NW20HS 31.0 mm PN 250 37 mm 14 mm M 36 x 2 19 mm 25 mm 41 36 mm G 1" -11 S 25 mm 29.74 x 3.53
XEWOR45NW25HS 37.5 mm PN 160 38 mm 15 mm M 42 x 2 24 mm 30 mm 50 50 mm G 1.1/4" -11 S 30 mm 37.69 x 3.53
XEWOR45NW32HS 37.0 mm PN 160 38 mm 15 mm M 52 x 2 21 mm 38 mm 55 50 mm G 1.1/2" -11 S 38 mm 44.04 x 3.53
Series: LL = Very light L = Light S = Heavy, PN = Nominal pressure PB = Max. operating pressure, Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.