XK

Fitting, cross shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 - 4 metric cylindrical outer thread
Construction K shaped
Design Fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 - 4 24° inner cone
Standard DIN 2353
ISO 8434-1
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L2 mm L7 mm External pipe Ø mm Operating pressure AF mm Series Ø d2 mm
Product Name L2 mm L7 mm External pipe Ø mm Operating pressure AF mm Series Ø d2 mm
XK 04 LL 11.0 15.0 Fitting, cross shaped; Steel 4 PN 100 9 LL 4
XK 05 LL 9.5 15.0 Fitting, cross shaped; Steel 5 PN 100 9 LL 5
XK 06 LL 9.5 15.0 Fitting, cross shaped; Steel 6 PN 100 9 LL 6
XK 08 LL 11.5 17.0 Fitting, cross shaped; Steel 8 PN 100 12 LL 8
XK NW 04 HL 12.0 19.0 Fitting, cross shaped; Steel 6 PN 315 12 L 6
XK NW 06 HL 14.0 21.0 Fitting, cross shaped; Steel 8 PN 315 12 L 8
XK NW 08 HL 15.0 22.0 Fitting, cross shaped; Steel 10 PN 315 14 L 10
XK NW 10 HL 17.0 24.0 Fitting, cross shaped; Steel 12 PN 315 17 L 12
XK NW 13 HL 21.0 28.0 Fitting, cross shaped; Steel 15 PN 315 19 L 15
XK NW 16 HL 23.5 31.0 Fitting, cross shaped; Steel 18 PN 315 24 L 18
XK NW 20 HL 27.5 35.0 Fitting, cross shaped; Steel 22 PN 160 27 L 22
XK NW 25 HL 30.5 38.0 Fitting, cross shaped; Steel 28 PN 160 36 L 28
XK NW 32 HL 34.5 45.0 Fitting, cross shaped; Steel 35 PN 160 41 L 35
XK NW 40 HL 40.0 51.0 Fitting, cross shaped; Steel 42 PN 160 50 L 42
XK NW 03 HS 16.0 23.0 Fitting, cross shaped; Steel 6 PN 630 12 S 6
XK NW 04 HS 17.0 24.0 Fitting, cross shaped; Steel 8 PN 630 14 S 8
XK NW 06 HS 17.5 25.0 Fitting, cross shaped; Steel 10 PN 630 17 S 10
XK NW 08 HS 21.5 29.0 Fitting, cross shaped; Steel 12 PN 630 17 S 12
XK NW 10 HS 22.0 30.0 Fitting, cross shaped; Steel 14 PN 630 19 S 14
XK NW 13 HS 24.5 33.0 Fitting, cross shaped; Steel 16 PN 400 24 S 16
XK NW 16 HS 26.5 37.0 Fitting, cross shaped; Steel 20 PN 400 27 S 20
XK NW 20 HS 30.0 42.0 Fitting, cross shaped; Steel 25 PN 400 36 S 25
XK NW 25 HS 35.5 49.0 Fitting, cross shaped; Steel 30 PN 400 41 S 30
XK NW 32 HS 41.0 57.0 Fitting, cross shaped; Steel 38 PN 315 50 S 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
Ø d2 = External pipe diameter
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.