XLM

Screw-in fitting, L shaped

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 metric cylindrical outer thread
Connection 2 + 3 metric cylindrical outer thread
Construction L shaped
Design Screw-in fitting
Material Steel
Scope of supply Socket (without union nut and cutting ring)
Sealing form 1 Shape B
Sealing form 2 + 3 24° inner cone
Standard DIN 2353
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name L7 mm L5 mm i mm L4 mm G External pipe Ø mm Operating pressure AF mm Series Ø D mm Ø d2 mm
Product Name L7 mm L5 mm i mm L4 mm G External pipe Ø mm Operating pressure AF mm Series Ø D mm Ø d2 mm
XLM NW 20 HL 35 26 16 Screw-in fitting, L shaped; Steel 27.5 M 26 x 1.5 22 PN 160 27 L 31.0 22
XLM NW 25 HL 38 30 18 Screw-in fitting, L shaped; Steel 30.5 M 33 x 2 28 PN 160 36 L 39.0 28
XLM NW 32 HL 45 34 20 Screw-in fitting, L shaped; Steel 34.5 M 42 x 2 35 PN 160 41 L 49.0 35
XLM NW 40 HL 51 39 22 Screw-in fitting, L shaped; Steel 40.0 M 48 x 2 42 PN 160 50 L 55.0 42
XLM NW 16 HS 37 26 16 Screw-in fitting, L shaped; Steel 26.5 M 27 x 2 20 PN 400 27 S 32.0 20
XLM NW 20 HS 42 30 18 Screw-in fitting, L shaped; Steel 30.0 M 33 x 2 25 PN 400 36 S 39.0 25
XLM NW 25 HS 49 34 20 Screw-in fitting, L shaped; Steel 35.5 M 42 x 2 30 PN 250 41 S 49.0 30
XLM NW 32 HS 57 39 22 Screw-in fitting, L shaped; Steel 41.0 M 48 x 2 38 PN 250 50 S 55.0 38
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure
Ø d2 = External pipe diameter
AF = Width across flats

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.