XLM VA

Screw-in fitting, L shaped



Properties

Connection 1 metric cylindrical outer thread
Connection 2 + 3 metric cylindrical outer thread
Design Screw-in fitting
Construction L shaped
Sealing form 1 Shape B
Sealing form 2 + 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353
Material Stainless steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L4 mm L5 mm L7 mm AF mm
Product Name Series Operating pressure Ø d2 mm G Ø D mm i mm L4 mm L5 mm L7 mm AF mm
XLM NW 20 HL VA L PN 160 22 M 26 x 1.5 31,0 16 27,5 26 35 27
XLM NW 25 HL VA L PN 160 28 M 33 x 2 39,0 18 30,5 30 38 36
XLM NW 32 HL VA L PN 160 35 M 42 x 2 49,0 20 34,5 34 45 41
XLM NW 40 HL VA L PN 160 42 M 48 x 2 55,0 22 40,0 39 51 50
XLM NW 16 HS VA S PN 400 20 M 27 x 2 32,0 16 26,5 26 37 27
XLM NW 20 HS VA S PN 400 25 M 33 x 2 39,0 18 30,0 30 42 36
XLM NW 25 HS VA S PN 250 30 M 42 x 2 49,0 20 35,5 34 49 41
XLM NW 32 HS VA S PN 250 38 M 48 x 2 55,0 22 41,0 39 57 50
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.