XLN

Screw-in fitting, L shaped



Properties

Connection 1 NPT external threads
Connection 2 + 3 metric cylindrical outer thread
Design Screw-in fitting
Construction L shaped
Sealing form 1 thread seal
Sealing form 2 + 3 24° inner cone
Scope of supply Socket (without union nut and cutting ring)
Standard DIN 2353
Surface electro galvanised
Material Steel

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name Series Operating pressure Ø d2 mm G i mm L4 mm L5 mm L7 mm AF mm
Product Name Series Operating pressure Ø d2 mm G i mm L4 mm L5 mm L7 mm AF mm
XLN 04 LL LL PN 100 4 1/8" -27 NPT 8 11,0 17 15 9
XLN 06 LL LL PN 100 6 1/8" -27 NPT 8 9,5 17 15 9
XLN 08 LL LL PN 100 8 1/8" -27 NPT 8 11,5 20 17 12
XLN NW 04 HL L PN 315 6 1/8" -27 NPT 8 12,0 20 19 12
XLN NW 06 HL L PN 315 8 1/4" -18 NPT 12 14,0 26 21 12
XLN NW 08 HL L PN 315 10 1/4" -18 NPT 12 15,0 27 22 14
XLN NW 10 HL L PN 315 12 3/8" -18 NPT 12 17,0 28 24 17
XLN NW 13 HL L PN 315 15 1/2" -14 NPT 14 21,0 34 28 19
XLN NW 16 HL L PN 315 18 1/2" -14 NPT 14 23,5 36 31 24
XLN NW 20 HL L PN 160 22 3/4" -14 NPT 16 27,5 42 35 27
XLN NW 25 HL L PN 160 28 1" -11.5 NPT 18 30,5 48 38 36
XLN NW 32 HL L PN 160 35 1.1/4" -11.5 NPT 20 34,5 54 45 41
XLN NW 40 HL L PN 160 42 1.1/2" -11.5 NPT 22 40,0 61 51 50
XLN NW 03 HS S PN 630 6 1/4" -18 NPT 12 16,0 26 23 12
XLN NW 04 HS S PN 630 8 1/4" -18 NPT 12 17,0 27 24 14
XLN NW 06 HS S PN 630 10 3/8" -18 NPT 12 17,5 28 25 17
XLN NW 08 HS S PN 630 12 3/8" -18 NPT 12 21,5 31 29 17
XLN NW 10 HS S PN 630 14 1/2" -14 NPT 14 22,0 32 30 19
XLN NW 13 HS S PN 400 16 1/2" -14 NPT 14 24,5 32 33 24
XLN NW 16 HS S PN 400 20 3/4" -14 NPT 16 26,5 42 37 27
XLN NW 20 HS S PN 400 25 1" -11.5 NPT 18 30,0 48 42 36
XLN NW 25 HS S PN 400 30 1.1/4" -11.5 NPT 20 35,5 54 49 41
XLN NW 32 HS S PN 315 38 1.1/2" -11.5 NPT 22 41,0 61 57 50
Series: LL = Very light L = Light S = Heavy - PN = Nominal pressure PB = Max. operating pressure - Ø d2 = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.