XMVE

Pressure gauge connection fitting

  • Image_1 Image_1
  • Image_2 Image_2

Properties

Connection 1 BSP cylindrical internal threads
Connection 2 Pipe socket not pre-assembled
Design Pressure gauge connection fitting
Material Steel
Scope of supply with edge sealing ring (socket without union nut and cutting ring)
Sealing form 1 Edge sealing ring
Sealing form 2 Pipe socket with cutting ring
Surface electro galvanised

Hints

Information about fitting, installation, pressure loads and permissible operating temperatures can be found in the technical information for pipe fittings.

Article Table

Product Name i mm L1 mm Operating pressure AF mm G1 Series Ø d2 mm
Product Name i mm L1 mm Operating pressure AF mm G1 Series Ø d2 mm
XMVE NW 04 L 14.5 38.0 PN 400 19 G 1/4" -19 L 6
XMVE NW 06 L 14.5 38.0 PN 400 19 G 1/4" -19 L 8
XMVE NW 08 L 14.5 39.5 PN 400 19 G 1/4" -19 L 10
XMVE NW 10 L 14.5 40.5 PN 400 19 G 1/4" -19 L 12
XMVE NW 03 S 20.0 45.0 PN 630 27 G 1/2" -14 S 6
XMVE NW 04 S 20.0 45.0 PN 630 27 G 1/2" -14 S 8
XMVE NW 06 S 20.0 47.0 PN 630 27 G 1/2" -14 S 10
XMVE NW 08 S 20.0 47.5 PN 630 27 G 1/2" -14 S 12
Series: LL = Very light L = Light S = Heavy
PN = Nominal pressure PB = Max. operating pressure
Ø = External pipe diameter

Disclaimer

Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability.
All data and information in our online catalogue are based on currently valid standards and the regulations from the employer's liability insurance association. Product safety can only be guaranteed when our assembly instructions are carefully observed. Non-adherence to these regulations can affect product operation and functioning and result in a loss of warranty. Our warranty is only valid for HANSA-FLEX products. Our products are constantly subject to further development and technical changes are therefore possible.